
CaseIH Puma 150
Power
150 hp
Production
2014+
Engine
Turbocharged with air-to-air aftercooling diesel, 6-cylinder 24-valve
Transmission
Full power shift
Drive
4WD
From the same series:
Introduction
Production Information of CaseIH, Puma 150
The production information of the tractor (Puma 150) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Basildon, England |
| $146,129 (2015 power shift ) | |
| Manufacturer | CaseIH |
| $144,426 (2014 CVT ) | |
| Original price | $136,669 (2014 power shift ) |
| $155,110 (2015 CVT ) |
Dimension and Tires Information of CaseIH, Puma 150
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Wheelbase | 107.6 inches [273 cm] |
|---|---|
| Bar rear axle | 98 inch length [2489 mm] |
| 109.8 inches*With suspended front axle [278 cm] | |
| Bar rear axle | 112 inch length [2844 mm] |
| Height (cab) | 118.3 inches [300 cm] |
| Standard tires (ag) | Front: 380/85R30. Rear: 460/85R42 |
|---|
Engine Specifications of CaseIH, Puma 150
Get the specifications for the engine and if different options are available.
| Liquid-cooled inline |
| 6-cylinder 24-valve |
| Turbocharged with air-to-air aftercooling diesel |
| Starter volts | 12 |
|---|---|
| Starter | Electric |
| Emission control | Selective catalytic reduction (SCR) |
| Fuel system | Electronic common rail |
| Maximum Power | 190 hp [141.7 kW] |
| Displacement | 410.6 ci [6.7 L] |
| Emissions | Tier 4 |
| Power | 150 hp [111.9 kW] |
| Bore/Stroke | 4.094x5.197 inches [104 x 132 mm] |
| Rated RPM | 2200 |
| Reversible OptOptional | |
| Cooling system | Viscous fan |
Transmission Information of CaseIH, Puma 150Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Full power shift |
|---|---|
| Gears | 18 forward and 6 reverse |
Transmission variants 2
| Type | Continuously variable transmission (CVT) |
|---|---|
| Gears | Infinite forward and reverse |
| 18-speed full power shift |
| Continuously variable transmission (CVT) |
Mechanical Specs of CaseIH, Puma 150Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Power steering |
| Cab standard with air-conditioning. |
| Wet disc brakes |
| Pneumatic OptOptional | |
| Trailer brakes | Hydraulic OptOptional |
Power Information of CaseIH, Puma 150Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 (1.375) |
| 1000/1000E (1.75) |
Hydraulics Specifications of CaseIH, Puma 150
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center pressure flow compensating |
|---|---|
| Steering flow | 17 gpm [64.3 lpm] |
| Total flow | 43.5 gpm [164.6 lpm] |
| Valves | 3 to 5 |
| Pump flow | 26.5 gpm [100.3 lpm] |
Three-Point Hitch of CaseIH, Puma 150
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| III/II OptOptional | |
| Rear lift | 7900 lbs [3583 kg] |
Electrical System of CaseIH, Puma 150
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 150 |
Frequently asked questions
How much horsepower does the CaseIH Puma 150 have?
The CaseIH Puma 150 delivers 150 HP.
What years was the CaseIH Puma 150 produced?
The CaseIH Puma 150 was produced in 2014+.
What engine does the CaseIH Puma 150 have?
The CaseIH Puma 150 is powered by a Turbocharged with air-to-air aftercooling diesel, 6-cylinder 24-valve engine.
What transmission does the CaseIH Puma 150 use?
The CaseIH Puma 150 uses a Full power shift transmission.
Is the CaseIH Puma 150 4WD?
The CaseIH Puma 150 is available in 4WD.