CaseIH Puma 145
Power
146 hp
Production
2011-2013
Engine
Turbocharged diesel, 6-cylinder
Transmission
Full power shift
Weight
14350 lbs [6509 kg]
Drive
4WD
From the same series:
Introduction
Production Information of CaseIH, Puma 145
The production information of the tractor (Puma 145) includes details about its manufacturing.
| Row-Crop tractor |
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, Puma 145
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Front tread | 61.4 to 88.8 inches [155 to 225 cm] |
|---|---|
| Wheelbase | 107.6 inches [273 cm] |
| Bar rear axle | 3.625 by 98 inches [92 by 2489 mm] |
| 109.8 inches (suspended front axle) [278 cm] | |
| Bar rear axle | 3.625 by 112 inches [92 by 2844 mm] |
| Operating weight | 14350 lbs [6509 kg] |
No data available
Engine Specifications of CaseIH, Puma 145
Get the specifications for the engine and if different options are available.
| FPT |
| Liquid-cooled |
| 6-cylinder |
| Turbocharged diesel |
| Emission control | Selective catalytic reduction (SCR) |
|---|---|
| Rated RPM | 2200 |
| Displacement | 410.6 ci [6.7 L] |
| Bore/Stroke | 4.094x5.197 inches [104 x 132 mm] |
| Emissions | Interim Tier 4 |
| Maximum Power (gross) | 188 hp [140.2 kW] |
| Rated Power (gross) | 146 hp [108.9 kW] |
| Oil capacity | 16 qts [15.1 L] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of CaseIH, Puma 145Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Full power shift |
|---|---|
| Gears | 18 forward and 6 reverse |
| Clutch | Electro-hydraulic wet disc |
Transmission variants 2
| Adds transport gear to the power shift, providing road speed at reduced engine RPMs. |
| Transmission | EconoGear |
|---|---|
| Clutch | Electro-hydraulic wet disc |
| Type | Full power shift |
| Gears | 19 forward and 6 reverse |
Transmission variants 3
| Type | Continuously variable transmission (CVT) |
|---|---|
| Gears | Infinite forward and reverse |
| 18-speed full power shift |
| 19-speed full power shift |
| Continuously variable transmission (CVT) |
Mechanical Specs of CaseIH, Puma 145Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard. Optional cab suspension. |
Power Information of CaseIH, Puma 145Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of CaseIH, Puma 145
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center pressure flow compensating (PFC) |
|---|---|
| Pump flow | 29 gpm [109.8 lpm] |
| 3 to 5 (electronic) | |
| Capacity | 19.5 gal [73.8 L] |
| 32 gpm (optional) [121.1 lpm] | |
| Rear valves | 3 to 4 (mechanical) |
Three-Point Hitch of CaseIH, Puma 145
Hitch category and rear/front lift capacity.
| Rear Type | 2/3N |
|---|---|
| Rear lift | 7,900 lbs [3583 kg] |
| 9,200 lbs (optional) [4173 kg] |
Electrical System of CaseIH, Puma 145
Battery voltage, charging system and ground.
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Batteries | 2 |
| 200 OptOptional | |
| Charging system | Alternator |
| Battery CCA | 650 |
| Charging amps | 150 |
Frequently asked questions
How much horsepower does the CaseIH Puma 145 have?
The CaseIH Puma 145 delivers 146 HP.
What years was the CaseIH Puma 145 produced?
The CaseIH Puma 145 was produced in 2011-2013.
What engine does the CaseIH Puma 145 have?
The CaseIH Puma 145 is powered by a Turbocharged diesel, 6-cylinder engine.
What transmission does the CaseIH Puma 145 use?
The CaseIH Puma 145 uses a Full power shift transmission.
How much does the CaseIH Puma 145 weigh?
The CaseIH Puma 145 weighs 14350 lbs [6509 kg].
Is the CaseIH Puma 145 4WD?
The CaseIH Puma 145 is available in 4WD.