Challenger MT465E
Power
115 hp
Production
2017-2020
Engine
Intercooled turbocharged diesel, 4-cylinder
Transmission
AutoPower IV
Weight
15432 lbs [6999 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Challenger, MT465E
The production information of the tractor (MT465E) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Challenger (a part of AGCO) |
|---|
Dimension and Tires Information of Challenger, MT465E
This section sums up the dimension and tires information of the tractor.
| Bar rear axle |
| Flange rear axle |
| Wheelbase | 105 inches [266 cm] |
|---|---|
| Width | 72 inches*Minimum width [182 cm] |
| Shipping weight | 15432 lbs [6999 kg] |
No data available
Engine Specifications of Challenger, MT465E
Get the specifications for the engine and if different options are available.
| AGCO Power |
| Liquid-cooled |
| 4-cylinder |
| Intercooled turbocharged diesel |
| Starter volts | 12 |
|---|---|
| Starter | Electric |
| Emission control | Selective catalytic reduction |
| Fuel system | High-pressure common rail direct injection |
| Maximum Power | 130 hp [96.9 kW] |
| Displacement | 299 ci [4.9 L] |
| Emissions | Tier IV |
| Power | 115 hp [85.8 kW] |
| Bore/Stroke | 4.251x5.276 inches [108 x 134 mm] |
| Torque RPM | 1600 |
| Torque | 537 lb-ft [728.2 Nm] |
| Rated RPM | 2100 |
Transmission Information of Challenger, MT465EY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | AutoPower IV |
|---|---|
| Clutch | Hydraulic wet disc |
| Type | Four-speed power shift |
| Gears | 16 forward and reverse |
Mechanical Specs of Challenger, MT465EY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. Auto-Guide 3000 ((Optional)) |
| Hydraulic wet disc brakes |
| Power steering |
| Differential lock | Electro-hydraulic front and rear |
|---|
Power Information of Challenger, MT465EY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
| 540/540E/1000/1000E |
Hydraulics Specifications of Challenger, MT465E
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| 50 gpmOptOptional [189.2 lpm] | |
| 29 gpmOptOptional [109.8 lpm] | |
| Valves | Up to 5 |
| Pump flow | 26 gpm [98.4 lpm] |
Three-Point Hitch of Challenger, MT465E
Hitch category and rear/front lift capacity.
| Rear Type | III/II |
|---|---|
| Rear lift (at 24"/610mm) | 11244 lbs [5100 kg] |
| Rear Arms | Telescopic link end |
Electrical System of Challenger, MT465E
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| 240 *Total charging capacity with optional twin 120A system. | |
| Charging system | Alternator |
| Charging amps | 175 |
Frequently asked questions
How much horsepower does the Challenger MT465E have?
The Challenger MT465E delivers 115 HP.
What years was the Challenger MT465E produced?
The Challenger MT465E was produced in 2017-2020.
What engine does the Challenger MT465E have?
The Challenger MT465E is powered by a Intercooled turbocharged diesel, 4-cylinder engine.
What transmission does the Challenger MT465E use?
The Challenger MT465E uses a AutoPower IV transmission.
How much does the Challenger MT465E weigh?
The Challenger MT465E weighs 15432 lbs [6999 kg].
Is the Challenger MT465E 4WD?
The Challenger MT465E is available in 4WD.