Challenger MT675E
Power
320 hp
Production
2014-2020
Engine
Turbocharged with air-to-air intercooler diesel, 6-cylinder 24-valve
Transmission
Techstar CVT
Weight
23810 lbs [10800 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Challenger, MT675E
The production information of the tractor (MT675E) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Jackson, Minnesota, USA |
| Manufacturer | Challenger (a part of AGCO) |
|---|
Dimension and Tires Information of Challenger, MT675E
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 122 inches [309 cm] |
|---|---|
| Bar rear axle | 4.33 by 105 inches [109 by 2667 mm] |
| Shipping weight | 23810 lbs [10800 kg] |
| Length | 218.6 inches [555 cm] |
| Bar rear axle | 4.33 by 118 inches [109 by 2997 mm] |
| Height (cab) | 141 inches [358 cm] |
No data available
Engine Specifications of Challenger, MT675E
Get the specifications for the engine and if different options are available.
| AGCO POWER |
| Liquid-cooled |
| Turbocharged with air-to-air intercooler diesel |
| 6-cylinder 24-valve |
| Rated RPM | 2100 |
|---|---|
| Displacement | 512.6 ci [8.4 L] |
| Emission control | Selective catalytic reduction (SCR) |
| Bore/Stroke | 4.37x5.71 inches [111 x 145 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Maximum Power | 350 hp [261.0 kW] |
| Power | 320 hp [238.6 kW] |
| Emissions | Tier IV |
Transmission Information of Challenger, MT675EY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Techstar CVT |
|---|---|
| Type | Continuously variable transmission (CVT) |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Challenger, MT675EY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. Optional OptiRide Plus hydraulic cab suspension. AgCommand ready; AUTO-GUIDE 3000 |
| Hydraulic wet disc brakes |
| Differential lock | Electro-hydraulic |
|---|---|
| Steering | Hydrostatic power |
Power Information of Challenger, MT675EY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000/1000E (1.75) |
Hydraulics Specifications of Challenger, MT675E
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center load sensing (CCLS) |
|---|---|
| Pump flow | 54 gpm [204.4 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| Valves | 4 to 6 |
Three-Point Hitch of Challenger, MT675E
Hitch category and rear/front lift capacity.
| Rear Type | III/IVN |
|---|---|
| Cat 4 (optional) | |
| Cat 3 Heavy Duty (optional) | |
| Rear lift (at ends) | 26455 lbs [11999 kg] |
| Drawbar | Cat. 3 |
Electrical System of Challenger, MT675E
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging volts | 12 |
| Charging system | Alternator |
| Charging amps | 240 (twin 120A) |
Frequently asked questions
How much horsepower does the Challenger MT675E have?
The Challenger MT675E delivers 320 HP.
What years was the Challenger MT675E produced?
The Challenger MT675E was produced in 2014-2020.
What engine does the Challenger MT675E have?
The Challenger MT675E is powered by a Turbocharged with air-to-air intercooler diesel, 6-cylinder 24-valve engine.
What transmission does the Challenger MT675E use?
The Challenger MT675E uses a Techstar CVT transmission.
How much does the Challenger MT675E weigh?
The Challenger MT675E weighs 23810 lbs [10800 kg].
Is the Challenger MT675E 4WD?
The Challenger MT675E is available in 4WD.