Introduction
Production Information of Deutz-Fahr, 4050E Keyline
The production information of the tractor (4050E Keyline) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Deutz-Fahr |
|---|
Dimension and Tires Information of Deutz-Fahr, 4050E Keyline
This section sums up the dimension and tires information of the tractor.
| 4WD ROPS Weight | 5512 lbs [2500 kg] |
|---|---|
| 2WD Wheelbase | 75.6 inches [192 cm] |
| Height (steering wheel) | 64.3 inches [163 cm] |
| Width | 70.9 inches [180 cm] |
| 4WD Wheelbase | 76.8 inches [195 cm] |
| 2WD Front tread | 57.6 inches [146 cm] |
| 2WD ROPS Weight | 4630 lbs [2100 kg] |
| Length | 139.8 inches [355 cm] |
| Rear tread | 56.7 inches [144 cm] |
| 4WD Front tread | 58.6 inches [148 cm] |
No data available
Engine Specifications of Deutz-Fahr, 4050E Keyline
Get the specifications for the engine and if different options are available.
| SDF 1000.3 |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Starter | Electric |
|---|---|
| Displacement | 183.1 ci [3.0 L] |
| Power | 49.4 hp [36.8 kW] |
| Bore/Stroke | 4.13x4.56 inches [105 x 116 mm] |
| Starter volts | 12 |
| Torque | 135.7 lb-ft [184.0 Nm] |
| Rated RPM | 2200 |
| Emissions | Stage IIIA |
Transmission Information of Deutz-Fahr, 4050E KeylineY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Gear |
|---|---|
| Gears | 8 forward and 2 reverse |
| Clutch | Mechanical dry disc |
Transmission variants 2
| Type | Creeper |
|---|---|
| Gears | 12 forward and 3 reverse |
| Clutch | Mechanical dry disc |
Transmission variants 3
| Type | Partially synchronized |
|---|---|
| Gears | 8 forward and reverse |
| Clutch | Mechanical dry disc |
| 8-speed gear |
| 12-speed creeper |
| 8-speed partially synchronized |
Mechanical Specs of Deutz-Fahr, 4050E KeylineY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Open operator station. Two-post ROPS available. |
| Power steering |
| Differential lock | Mechanical |
|---|
Power Information of Deutz-Fahr, 4050E KeylineY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 540/1000 OptOptional | |
| Rear PTO Type | 540 |
| 540/540E OptOptional |
Hydraulics Specifications of Deutz-Fahr, 4050E Keyline
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Valves | 2 to 4 |
| Pump flow | 8.2 gpm [31.0 lpm] |
Three-Point Hitch of Deutz-Fahr, 4050E Keyline
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift | 3527 lbs [1599 kg] |
Electrical System of Deutz-Fahr, 4050E Keyline
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Deutz-Fahr 4050E Keyline have?
The Deutz-Fahr 4050E Keyline delivers 49 HP.
What years was the Deutz-Fahr 4050E Keyline produced?
The Deutz-Fahr 4050E Keyline was produced in 2018+.
What engine does the Deutz-Fahr 4050E Keyline have?
The Deutz-Fahr 4050E Keyline is powered by a Diesel, 3-cylinder engine.
What transmission does the Deutz-Fahr 4050E Keyline use?
The Deutz-Fahr 4050E Keyline uses a Gear transmission.
How much does the Deutz-Fahr 4050E Keyline weigh?
The Deutz-Fahr 4050E Keyline weighs 5512 lbs [2500 kg].
Is the Deutz-Fahr 4050E Keyline 4WD?
The Deutz-Fahr 4050E Keyline is available in 2WD/4WD.