Introduction
Production Information of Deutz-Fahr, D 5207
The production information of the tractor (D 5207) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Deutz-Fahr |
|---|
Dimension and Tires Information of Deutz-Fahr, D 5207
This section sums up the dimension and tires information of the tractor.
| 2WD Ground clearance | 18.1 inches [45 cm] |
|---|---|
| 2WD Wheelbase | 79.1 inches [200 cm] |
| Width | 82.3 inches [209 cm] |
| 4WD Length | 140.6 inches [357 cm] |
| 4WD Wheelbase | 81.1 inches [205 cm] |
| 4WD Ground clearance | 11.8 inches [29 cm] |
| Height | 95.7 inches [243 cm] |
| 2WD Length | 137.4 inches [348 cm] |
| Rear tread | 55.1 to 74.8 inches [139 to 189 cm] |
| 2WD Front tread | 53.2 to 72.8 inches [135 to 184 cm] |
| 2WD Standard tires (ag) | Front: 7.50-16. Rear: 14.9-28 |
|---|---|
| 4WD Standard tires (ag) | Front: 10.5-18. Rear: 14.9-28 |
Engine Specifications of Deutz-Fahr, D 5207
Get the specifications for the engine and if different options are available.
| Deutz F3L 912 |
| Air-cooled |
| Diesel |
| 3-cylinder |
| Power | 51 hp [38.0 kW] |
|---|---|
| Displacement | 172.50 ci [2.8 L] |
| Rated RPM | 2300 |
| Bore/Stroke | 3.94x4.72 inches [100 x 120 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Deutz-Fahr, D 5207Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | TW50.31 |
|---|---|
| Type | Synchronized |
| Gears | 8 forward and 4 reverse |
Mechanical Specs of Deutz-Fahr, D 5207Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Four-post ROPS. Cab available with heat. |
| Power steering |
| Mechanical disc brakes |
Power Information of Deutz-Fahr, D 5207Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Front PTO Type | 1000 |
| Rear PTO Type | 540/1000 |
| Front PTO | Independent |
Hydraulics Specifications of Deutz-Fahr, D 5207
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pressure | 2538 psi [175.0 bar] |
| Pump flow | 9.2 gpm [34.8 lpm] |
Three-Point Hitch of Deutz-Fahr, D 5207
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Front lift | 3372 lbs [1529 kg] |
| Front Hitch | I |
| Control | Position and draft control |
| Rear lift | 5300 lbs [2404 kg] |
Frequently asked questions
How much horsepower does the Deutz-Fahr D 5207 have?
The Deutz-Fahr D 5207 delivers 51 HP.
What years was the Deutz-Fahr D 5207 produced?
The Deutz-Fahr D 5207 was produced in 1980-1984.
What engine does the Deutz-Fahr D 5207 have?
The Deutz-Fahr D 5207 is powered by a Diesel, 3-cylinder engine.
What transmission does the Deutz-Fahr D 5207 use?
The Deutz-Fahr D 5207 uses a TW50.31 transmission.
Is the Deutz-Fahr D 5207 4WD?
The Deutz-Fahr D 5207 is available in 2WD/4WD.