Introduction
Production Information of Deutz-Fahr, 4050E
The production information of the tractor (4050E) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Deutz-Fahr |
|---|
Dimension and Tires Information of Deutz-Fahr, 4050E
This section sums up the dimension and tires information of the tractor.
| 2WD Wheelbase | 80.4 inches [204 cm] |
|---|---|
| 4WD Wheelbase | 77.8 inches [197 cm] |
| Width | 70.2 inches [178 cm] |
No data available
Engine Specifications of Deutz-Fahr, 4050E
Get the specifications for the engine and if different options are available.
| SDF 1000.3 WT |
| Liquid-cooled |
| Turbocharged diesel |
| 3-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 183.1 ci [3.0 L] |
| Power | 49.4 hp [36.8 kW] |
| Bore/Stroke | 4.13x4.56 inches [105 x 116 mm] |
| Starter | Electric |
| Torque | 157.1 lb-ft [213.0 Nm] |
| Emissions | Stage IIIA |
Transmission Information of Deutz-Fahr, 4050EY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Five synchronized gears in three ranges with shuttle. |
| Type | Partially synchronized |
|---|---|
| Gears | 15 forward and reverse |
Mechanical Specs of Deutz-Fahr, 4050EY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Open operator station. Cab optional. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical |
|---|
Power Information of Deutz-Fahr, 4050EY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/540E |
Hydraulics Specifications of Deutz-Fahr, 4050E
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Valves | 2 |
| Pump flow | 11.1 gpm [42.0 lpm] |
Three-Point Hitch of Deutz-Fahr, 4050E
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift | 5512 lbs [2500 kg] |
Electrical System of Deutz-Fahr, 4050E
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Deutz-Fahr 4050E have?
The Deutz-Fahr 4050E delivers 49 HP.
What years was the Deutz-Fahr 4050E produced?
The Deutz-Fahr 4050E was produced in 2018+.
What engine does the Deutz-Fahr 4050E have?
The Deutz-Fahr 4050E is powered by a Turbocharged diesel, 3-cylinder engine.
What transmission does the Deutz-Fahr 4050E use?
The Deutz-Fahr 4050E uses a Partially synchronized transmission.
Is the Deutz-Fahr 4050E 4WD?
The Deutz-Fahr 4050E is available in 2WD/4WD.