Deutz-Fahr 5130
Power
118 hp
Production
2013-2017
Engine
Turbocharged intercooled diesel, 4-cylinder
Transmission
Partial power shift
Drive
4WD
From the same series:
Introduction
Production Information of Deutz-Fahr, 5130
The production information of the tractor (5130) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Deutz-Fahr |
|---|
Dimension and Tires Information of Deutz-Fahr, 5130
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 96.1 inches [244 cm] |
|---|---|
| Front tread | 73.6 to 76 inches [186 to 193 cm] |
| Height (cab) | 107.9 inches [274 cm] |
| Length | 168.1 inches [426 cm] |
| Rear tread | 72.8 inches [184 cm] |
| Width | 95.6 inches [242 cm] |
| Standard tires (ag) | Front: 440/65R28. Rear: 540/65R38 |
|---|
Engine Specifications of Deutz-Fahr, 5130
Get the specifications for the engine and if different options are available.
| Deutz TCD 3.6 L04 |
| Liquid-cooled |
| 4-cylinder |
| Turbocharged intercooled diesel |
| Oil change | 500 h |
|---|---|
| Oil capacity | 10.6 qts [10.0 L] |
| Maximum Power (gross) | 124.7 hp [93.0 kW] |
| Torque | 354 lb-ft [480.0 Nm] |
| Rated RPM | 2200 |
| Displacement | 220.9 ci [3.6 L] |
| Rated Power (gross) | 118 hp [88.0 kW] |
| Fuel system | Common rail |
| Bore/Stroke | 3.86x4.72 inches [98 x 120 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Torque RPM | 1600 |
Transmission Information of Deutz-Fahr, 5130Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Five gears in two ranges with three-speed power shift and power shuttle. |
| Type | Partial power shift |
|---|---|
| Gears | 30 forward and reverse |
Transmission variants 2
| Five gears in four ranges with three-speed power shift and power shuttle. |
| Type | Partial power shift |
|---|---|
| Gears | 60 forward and reverse |
Transmission variants 3
| Transmission | ZF TTV |
|---|---|
| Type | Infinitely variable transmission |
| Gears | Infinite forward and reverse |
| 30-speed partial power shift |
| 60-speed partial power shift |
| Infinitely variable transmission |
Mechanical Specs of Deutz-Fahr, 5130Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. |
| Power steering |
| Wet disc brakes |
Power Information of Deutz-Fahr, 5130Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Front PTO Type | 1000 |
|---|---|
| Rear PTO | Independent |
| Front PTO | Independent |
| 540/540E/1000 *With TTV option. | |
| Clutch | Electro-hydraulic |
| Clutch | Electro-hydraulic |
| Rear PTO Type | 540/540E/1000/1000E |
Hydraulics Specifications of Deutz-Fahr, 5130
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 2683 psi [185.0 bar] |
|---|---|
| Pump flow | 15.85 gpm [60.0 lpm] |
| 23.8 gpmOptOptional [90.1 lpm] |
Three-Point Hitch of Deutz-Fahr, 5130
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Front lift | 4078.6 lbs [1850 kg] |
| Rear lift | 10251.5 lbs [4650 kg] |
| 14550.5 lbsOptOptional [6600 kg] |
Electrical System of Deutz-Fahr, 5130
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Deutz-Fahr 5130 have?
The Deutz-Fahr 5130 delivers 118 HP.
What years was the Deutz-Fahr 5130 produced?
The Deutz-Fahr 5130 was produced in 2013-2017.
What engine does the Deutz-Fahr 5130 have?
The Deutz-Fahr 5130 is powered by a Turbocharged intercooled diesel, 4-cylinder engine.
What transmission does the Deutz-Fahr 5130 use?
The Deutz-Fahr 5130 uses a Partial power shift transmission.
Is the Deutz-Fahr 5130 4WD?
The Deutz-Fahr 5130 is available in 4WD.