Deutz-Fahr 5125
Power
118 hp
Production
2017+
Engine
Turbocharged intercooled diesel, 4-cylinder
Transmission
SDF
Drive
2WD/4WD
From the same series:
Introduction
Deutz-Fahr 5125 Utility Tractor
The Deutz-Fahr 5125 is a utility tractor produced starting in 2017. It belongs to the 5 Series, designed to provide versatile mechanical performance for a wide range of agricultural operations.
Engine and Performance
The tractor is powered by a 3.6-liter, 4-cylinder Deutz TCD 3.6 L04 turbocharged and intercooled diesel engine. It generates a rated power of 118 hp (88.0 kW) at 2000 RPM and reaches a maximum gross power of 124.5 hp (92.8 kW). The engine produces a maximum torque of 368.8 lb-ft at 1600 RPM, providing consistent pulling capability for fieldwork.
Transmission and Drivetrain
The 5125 features a partial power shift transmission available in two configurations: a 20-speed version with two-speed power shift or a 30-speed version with three-speed power shift. Both options include a power shuttle and are further configurable with under-drive and super-creeper ranges, allowing for up to 60 forward and reverse speeds to suit specific operational requirements. The tractor is equipped with electro-hydraulic front and rear differential locks and wet disc brakes.
Hydraulics and Hitch
The hydraulic system utilizes an open-center design with a standard pump flow of 14.5 gpm (54.9 lpm). The rear hitch is a Category II type with a lift capacity of 7540 lbs (3420 kg). An optional front lift system is available, providing a capacity of 4630 lbs (2100 kg).
PTO System
The independent rear PTO operates at 540/540E speeds and is engaged via an electro-hydraulic clutch. An optional independent front PTO is available, operating at 1000 RPM, along with optional 1000/1000E rear PTO configurations to accommodate various implements.
Conclusion
The Deutz-Fahr 5125 is engineered as a reliable utility tractor suitable for diverse farming tasks. Its combination of multiple transmission options, flexible PTO configurations, and significant lift capacity makes it a functional choice for operations requiring precise speed control and implement versatility.
Production Information of Deutz-Fahr, 5125
- Utility tractor
| Manufacturer | Deutz-Fahr |
|---|
Dimension and Tires Information of Deutz-Fahr, 5125
| 2WD Wheelbase | 91.7 inches [232 cm] |
|---|---|
| Height | 108.7 inches [276 cm] |
| Width | 85.4 inches [216 cm] |
| 4WD Wheelbase | 93.3 inches [236 cm] |
| Length | 163.2 inches [414 cm] |
Minimum width.
| Standard tires (ag) | Front: 340/85R28. Rear: 420/85R38 |
|---|---|
| Optional tires (ag) | Front: 440/65R28. Rear: 540/65R38 |
Engine Specifications of Deutz-Fahr, 5125
- Deutz TCD 3.6 L04
- Liquid-cooled
- Turbocharged intercooled diesel
- 4-cylinder
| Torque RPM | 1600 |
|---|---|
| Displacement | 220.9 ci [3.6 L] |
| Maximum Power (gross) | 124.5 hp [92.8 kW] |
| Bore/Stroke | 3.86x4.72 inches [98 x 120 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Torque | 368.8 lb-ft [500.1 Nm] |
| Rated RPM | 2000 |
| Rated Power (gross) | 118 hp [88.0 kW] |
Transmission Information of Deutz-Fahr, 5125
Transmission variants 1
- Five gears in two ranges with two-speed power shift and power shuttle. Also available with additional under-drive and super-creeper ranges, providing 40 total speeds in each direction.
| Transmission | SDF |
|---|---|
| Type | Partial power shift |
| Gears | 20 forward and reverse |
Transmission variants 2
- Five gears in two ranges with three-speed power shift and power shuttle. Also available with additional under-drive and super-creeper ranges, providing 60 total speeds in each direction.
| Transmission | SDF |
|---|---|
| Type | Partial power shift |
| Gears | 30 forward and reverse |
- 20-speed partial power shift
- 30-speed partial power shift
Mechanical Specs of Deutz-Fahr, 5125
- Cab standard with available air-conditioning.
- Two- or four-wheel drive
- Wet disc brakes
- Power steering
| Trailer brakes(optional) | Hydraulic |
|---|---|
| Differential lock | Electro-hydraulic front and rear |
| Differential lock(optional) | Pneumatic |
Power Information of Deutz-Fahr, 5125
| Rear PTO | Independent |
|---|---|
| Front PTO(optional) | Independent |
| Front PTO(optional) | 1000/1000E |
| Clutch | Electro-hydraulic |
| Front PTO Type | 1000 |
| Rear PTO Type | 540/540E |
Hydraulics Specifications of Deutz-Fahr, 5125
| Type | Open center |
|---|---|
| Type(optional) | 23.8 gpm [90.1 lpm] |
| Pump flow | 14.5 gpm [54.9 lpm] |
| Pump flow(optional) | 15.85 gpm [60.0 lpm] |
Three-Point Hitch of Deutz-Fahr, 5125
| Rear Type | II |
|---|---|
| Front lift | 4630 lbs [2100 kg] |
| Front lift(optional) | 11596 lbs [5259 kg] |
| Rear lift | 7540 lbs [3420 kg] |
| Rear lift(optional) | 10395 lbs [4715 kg] |
Electrical System of Deutz-Fahr, 5125
| Battery AH | 100 |
|---|---|
| Ground | Negative |
| Battery CCA | 650 |
| Charging volts | 12 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 150 |
Where it sits
With 118 HP, the Deutz-Fahr 5125 sits just above 5115 (111 HP) in Deutz-Fahr's range. Its power puts it in the 68th percentile of 2010s models in our database (2476 machines).
Frequently asked questions
How much horsepower does the Deutz-Fahr 5125 have?
The Deutz-Fahr 5125 delivers 118 HP.
What years was the Deutz-Fahr 5125 produced?
The Deutz-Fahr 5125 was produced in 2017+.
What engine does the Deutz-Fahr 5125 have?
The Deutz-Fahr 5125 is powered by a Turbocharged intercooled diesel, 4-cylinder engine.
What transmission does the Deutz-Fahr 5125 use?
The Deutz-Fahr 5125 uses a SDF transmission.
Is the Deutz-Fahr 5125 4WD?
The Deutz-Fahr 5125 is available in 2WD/4WD.