Farmall 1026
Power
127 hp
Production
1970-1971
Engine
Turbocharged diesel, 6-cylinder
Transmission
Hydrostatic
Weight
11100 lbs [5034 kg]
Drive
2WD/4WD
From the same series:
Introduction
Production Information of Farmall, 1026
The production information of the tractor (1026) includes details about its manufacturing.
| Original price was $11,800 in 1971 |
| Row-Crop tractor |
| Built in Rock Island, Illinois, USA |
| Manufacturer | Farmall (a part of International Harvester) |
|---|---|
| Total built | 2,414 |
Dimension and Tires Information of Farmall, 1026
This section sums up the dimension and tires information of the tractor.
| Front tread | 60 to 84 inches [152 to 213 cm] |
|---|---|
| Wheelbase | 105 inches [266 cm] |
| Ballasted weight | 14975 lbs [6792 kg] |
| Operating weight | 11100 lbs [5034 kg] |
| Length | 166 inches [421 cm] |
| Bar rear axle | 3.25 inch diameter [82 mm] |
| Height (steering wheel) | 86 inches [218 cm] |
| Ag front | 11L-15 |
|---|---|
| Ag rear | 18.4-38 |
Engine Specifications of Farmall, 1026
Get the specifications for the engine and if different options are available.
| International Harvester DT-407 |
| Liquid-cooled |
| Turbocharged diesel |
| 6-cylinder |
| Coolant capacity | 24 qts [22.7 L] |
|---|---|
| Power (gross) | 127 hp [94.7 kW] |
| Air cleaner | Dual-stage dry |
| Rated RPM | 2400 |
| Compression | 16:1 |
| Displacement | 406.9 ci [6.7 L] |
| Power (net) | 123 hp [91.7 kW] |
| Bore/Stroke | 4.321x4.625 inches [110 x 117 mm] |
| Oil capacity | 13 qts [12.3 L] |
| Starter volts | 12 |
| Idle RPM | 900-2400 |
Transmission Information of Farmall, 1026Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
| Oil capacity | 28 qts [26.5 L] |
Mechanical Specs of Farmall, 1026Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Open operator station. |
| Power steering |
| Differential hydraulic dry disc brakes |
Power Information of Farmall, 1026Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Engine RPM | 540@2100 |
| 540/1000 | |
| Clutch | Hydraulic disc |
| 1000@2100 | |
| Rear PTO Type | 1000 |
Hydraulics Specifications of Farmall, 1026
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Rear valves | 1 or 2 |
Three-Point Hitch of Farmall, 1026
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Hydraulic draft control |
Electrical System of Farmall, 1026
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Battery AH | 204 |
| Batteries | 2 |
| Battery volts | 6 |
Frequently asked questions
How much horsepower does the Farmall 1026 have?
The Farmall 1026 delivers 127 HP.
What years was the Farmall 1026 produced?
The Farmall 1026 was produced in 1970-1971.
What engine does the Farmall 1026 have?
The Farmall 1026 is powered by a Turbocharged diesel, 6-cylinder engine.
What transmission does the Farmall 1026 use?
The Farmall 1026 uses a Hydrostatic transmission.
How much does the Farmall 1026 weigh?
The Farmall 1026 weighs 11100 lbs [5034 kg].
Is the Farmall 1026 4WD?
The Farmall 1026 is available in 2WD/4WD.