Farmall 826
Power
102 hp[P] hp
Production
1969-1971
Engine
LP-gas, 6-cylinder
Transmission
International Harvester Torque Amplifier
Weight
9860 lbs [4472 kg]
Drive
2WD/4WD
From the same series:
Introduction
Production Information of Farmall, 826
The production information of the tractor (826) includes details about its manufacturing.
| Original price was $9,600 in 1971 |
| Row-Crop tractor |
| Built in Rock Island, Illinois, USA |
| Manufacturer | Farmall (a part of International Harvester) |
|---|---|
| Total built | 9,591 |
Dimension and Tires Information of Farmall, 826
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 105 inches [266 cm] |
|---|---|
| Ballasted weight | 13840 lbs [6277 kg] |
| Gear Operating weight | 9860 lbs [4472 kg] |
| Length | 164 inches [416 cm] |
| Bar rear axle | 3.25 by 92 inches [82 by 2336 mm] |
| Height (steering wheel) | 84 inches [213 cm] |
| Ag front | 9.5L-15 |
|---|---|
| Ag rear | 18.4-34 |
Engine Specifications of Farmall, 826
Get the specifications for the engine and if different options are available.
| International Harvester C-301 |
| Liquid-cooled |
| LP-gas |
| 6-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 301 ci [4.9 L] |
| Starter | Electric |
| Bore/Stroke | 3.8125x4.39 inches [97 x 112 mm] |
| Coolant capacity | 37 qts [35.0 L] |
| Oil capacity | 12 qts [11.4 L] |
| Coolant capacity | 37 qts [35.0 L] |
| Starter volts | 12 |
| Rated RPM | 2400 |
Transmission Information of Farmall, 826Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | International Harvester Torque Amplifier |
|---|---|
| Clutch | Dry disc |
| Type | Two-speed power shift |
| Gears | 16 forward and 8 reverse |
Transmission variants 2
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
| 16-speed two-speed power shift |
| Hydrostatic |
Mechanical Specs of Farmall, 826Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Hydraulic dry disc brakes |
| Power steering |
| Open operator station. Cab optional. |
| Final drives | Bull gear |
|---|---|
| Differential lock | Mechanical rear OptOptional |
Power Information of Farmall, 826Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2100 | |
| Engine RPM | 540@2100 |
| Rear PTO Type | 1000 |
| 540/1000 |
Hydraulics Specifications of Farmall, 826
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|
Three-Point Hitch of Farmall, 826
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|
Electrical System of Farmall, 826
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| 1 (gas/LP) | |
| Battery volts | 6 (diesel) |
| Batteries | 2 (diesel) |
| 1 (gas/LP) |
Frequently asked questions
How much horsepower does the Farmall 826 have?
The Farmall 826 delivers 102 hp[P] HP.
What years was the Farmall 826 produced?
The Farmall 826 was produced in 1969-1971.
What engine does the Farmall 826 have?
The Farmall 826 is powered by a LP-gas, 6-cylinder engine.
What transmission does the Farmall 826 use?
The Farmall 826 uses a International Harvester Torque Amplifier transmission.
How much does the Farmall 826 weigh?
The Farmall 826 weighs 9860 lbs [4472 kg].
Is the Farmall 826 4WD?
The Farmall 826 is available in 2WD/4WD.