Farmall B-450 tractor

Farmall B-450

Power

55 hp

Production

1959-1970

Engine

Diesel, 4-cylinder

Transmission

Gear

Weight

5930 lbs [2689 kg]

Drive

2WD

Introduction

Production Information of Farmall, B-450

The production information of the tractor (B-450) includes details about its manufacturing.

Row-Crop tractor
Built in Doncaster, England
ManufacturerFarmall (a part of International Harvester)
Total built11,011

Dimension and Tires Information of Farmall, B-450

This section sums up the dimension and tires information of the tractor.

Rear tread96.5 to 113.25 inches [245 to 287 cm]
Wheelbase79.5 inches [201 cm]
Operating weight5930 lbs [2689 kg]
Height (steering wheel)77.75 inches [197 cm]
Length139.5 inches (tricycle) [354 cm]
Front tread51 to 81 inches [129 to 205 cm]
Clearance (front axle)19.6 inches [49 cm]
144.5 inches (wide-front) [367 cm]
Rear tread84.5 to 101.25 inches [214 to 257 cm]
Rear tread64 to 84 inches [162 to 213 cm]
Front tread8/11.5/13.75/16.75 inches [20/29/34/42 cm]
Ag front6.00x16
12.00x38
Ag rear13.00x30
Ag rear14.00x30

Engine Specifications of Farmall, B-450

Get the specifications for the engine and if different options are available.

Liquid-cooled
4-cylinder
Diesel
Rated RPM1500
StarterElectric
Displacement264 ci [4.3 L]
Bore/Stroke4.00x5.25 inches [102 x 133 mm]
Power55 hp [41.0 kW]
Torque RPM1100
Torque200 lb-ft [271.2 Nm]
Coolant capacity26.4 qts [25.0 L]
Oil capacity9.6 qts [9.1 L]
Starter volts12

Transmission Information of Farmall, B-450Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

TypeGear
Oil capacity52.8 qts [50.0 L]
Gears5 forward and 1 reverse
Clutch305mm dry disc

Mechanical Specs of Farmall, B-450Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two-wheel drive
Open operator station.
Manual steering
Differential lockMechanical rear

Power Information of Farmall, B-450Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTO Type540 (1.375)
Engine RPM555@1500

Hydraulics Specifications of Farmall, B-450

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
Capacity3.6 gal [13.6 L]
Pressure2000 psi [137.9 bar]

Three-Point Hitch of Farmall, B-450

Hitch category and rear/front lift capacity.

Rear TypeII
Rear lift6240 lbs [2830 kg]

Frequently asked questions

How much horsepower does the Farmall B-450 have?

The Farmall B-450 delivers 55 HP.

What years was the Farmall B-450 produced?

The Farmall B-450 was produced in 1959-1970.

What engine does the Farmall B-450 have?

The Farmall B-450 is powered by a Diesel, 4-cylinder engine.

What transmission does the Farmall B-450 use?

The Farmall B-450 uses a Gear transmission.

How much does the Farmall B-450 weigh?

The Farmall B-450 weighs 5930 lbs [2689 kg].

Is the Farmall B-450 4WD?

The Farmall B-450 is available in 2WD.

Compare the Farmall B-450 with another model