Farmall Super A
Power
17 hp[P] hp
Production
1947-1954
Engine
4-cylinder
Transmission
Sliding gear
Weight
2,400 lbs [1088 kg]
Drive
2WD
From the same series:
Introduction
Production Information of Farmall, Super A
The production information of the tractor (Super A) includes details about its manufacturing.
| The IH/Farmall Super A was an improved version of the A. The biggest change was that the previous Lift-All system was replaced with the new Touch Control hydraulic system. This was in response to the Ferguson three-point system used by Ford. |
| Manufacturer | Farmall (a part of International Harvester) |
|---|---|
| Original price | $1,400 (1954) |
| Total built | 107,636 |
| Factories | Louisville, Kentucky, USA |
| Chicago, Illinois, USA |
Dimension and Tires Information of Farmall, Super A
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 71.1 inches [180 cm] |
|---|---|
| Height (steering wheel) | 64.25 inches [163 cm] |
| Clearance (front axle) | 22.25 inches [56 cm] |
| Width | 55.8 inches [141 cm] |
| Max Clearance (drawbar) | 16.8 inches [42 cm] |
| Length | 106.8 inches [271 cm] |
| Height (exhaust) | 81.75 inches [207 cm] |
| Weight | 2,400 lbs [1088 kg] |
| Ballasted weight | 3,450 lbs [1564 kg] |
| Min Clearance (drawbar) | 11.5 inches [29 cm] |
| Clearance (rear axle) | 21.625 inches [54 cm] |
| Rear tread | 40 to 68 inches [101 to 172 cm] |
| Front tread | 44 to 64 inches [111 to 162 cm] |
| Front tread | 43 inches [109 cm] |
| Ag front | 5.00-15 |
|---|---|
| Ag rear | 9-24 |
Engine Specifications of Farmall, Super A
Get the specifications for the engine and if different options are available.
| International Harvester |
| Liquid-cooled |
| 4-cylinder |
| Kerosene |
| Exhaust valve clearance | 0.014 inches (hot) [0.356 mm] |
|---|---|
| Intake valve clearance | 0.014 inches (hot) [0.356 mm] |
| Firing order | 1-3-4-2 |
| Starter volts | 6 |
| Firing order | 1-3-4-2 |
| Displacement | 113.1 ci [1.9 L] |
| Rated RPM | 1400 |
| Starter volts | 6 |
| Bore/Stroke | 3.00x4.00 inches [76 x 102 mm] |
| Point gap | 0.020 inches [0.508 mm] |
| Sparkplug gap | 0.025 inches [0.635 mm] |
| Coolant capacity | 13 qts [12.3 L] |
Transmission Information of Farmall, Super AY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Sliding gear |
|---|---|
| 4.5 qts (PTO) [4.3 L] | |
| Oil capacity | 4 qts [3.8 L] |
| Gears | 4 forward and 1 reverse |
| 5 qts (PTO/pulley) [4.7 L] | |
| Clutch | 9-inch dry disc |
Mechanical Specs of Farmall, Super AY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Differential mechanical contracting band brakes |
| Steering | Manual |
|---|
Power Information of Farmall, Super AY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of Farmall, Super A
Hydraulic system type, pressure, pump flow and valves.
| Type | IH Touch-Control |
|---|---|
| Capacity | 2.1 gal [7.9 L] |
| Valves | 1 |
Three-Point Hitch of Farmall, Super A
Hitch category and rear/front lift capacity.
| Type | Mid-mount Touch Control rockshaft |
|---|
Electrical System of Farmall, Super A
Battery voltage, charging system and ground.
| Ground | Postitive |
|---|---|
| Battery volts | 6 |
Frequently asked questions
How much horsepower does the Farmall Super A have?
The Farmall Super A delivers 17 hp[P] HP.
What years was the Farmall Super A produced?
The Farmall Super A was produced in 1947-1954.
What engine does the Farmall Super A have?
The Farmall Super A is powered by a 4-cylinder engine.
What transmission does the Farmall Super A use?
The Farmall Super A uses a Sliding gear transmission.
How much does the Farmall Super A weigh?
The Farmall Super A weighs 2,400 lbs [1088 kg].
Is the Farmall Super A 4WD?
The Farmall Super A is available in 2WD.