Farmall D-217 tractor

Farmall D-217

Power

17 hp

Production

1956-1962

Engine

Diesel, 2-cylinder

Transmission

Gear

Weight

2350 lbs [1065 kg]

Drive

2WD

Introduction

International Harvester Farmall D-217

The International Harvester Farmall D-217 is a row-crop tractor produced between 1956 and 1962 in Neuss, Germany. Designed for mid-range agricultural operations, this model is recognized for its compact design and mechanical simplicity, with a total production run of 10,145 units.

Engine and Performance

The D-217 is powered by the International Harvester DD-74, a two-cylinder, liquid-cooled diesel engine. With a displacement of 74.3 cubic inches (1.2 liters) and a compression ratio of 19:1, it delivers 17 horsepower (12.7 kW) at a rated speed of 1900 RPM. The engine cooling system has a capacity of 10.0 liters, while the oil capacity is 3.1 liters.

Transmission and Drivetrain

The tractor utilizes a gear-type transmission providing 6 forward speeds and 1 reverse gear, allowing for precise speed selection during field tasks. It is configured as a two-wheel-drive machine, featuring manual steering to ensure direct control for the operator. The rear power take-off (PTO) operates at a standard speed of 540 RPM.

Dimensions and Hydraulics

The tractor has a total length of 252 cm and a width of 158 cm, with an open operator station design. It weighs approximately 1065 kg and offers a ground clearance of 38 cm. The rear hitch is classified as Category I, ensuring compatibility with a variety of light implements. The front and rear tread widths are adjustable between 125 cm and 170 cm to suit different row spacing requirements.

Conclusion

The International Harvester D-217 is a durable, utility-focused tractor well-suited for small-to-medium scale farming operations. Its combination of a reliable diesel engine, adjustable tread widths, and manual controls makes it an efficient machine for general row-crop cultivation and light traction work.

Production Information of Farmall, D-217

  • Row-Crop tractor
  • Built in Neuss, Germany
ManufacturerFarmall (a part of International Harvester)
Total built10,145

Dimension and Tires Information of Farmall, D-217

Rear tread49.25 to 67 inches [125 to 170 cm]
Length99.5 inches [252 cm]
Ground clearance15 inches [38 cm]
Weight2350 lbs [1065 kg]
Width62.5 inches [158 cm]
Front tread49.25 to 67 inches [125 to 170 cm]
Height61.5 inches [156 cm]
Ag front4.50x16
Ag rear9x24
Ag rear(optional)4.00x19
Ag rear8x24
Ag rear(optional)8x32
Ag front4.50x16

Engine Specifications of Farmall, D-217

  • International Harvester DD-74
  • Liquid-cooled
  • Diesel
  • 2-cylinder
Oil capacity3.3 qts [3.1 L]
Displacement74.3 ci [1.2 L]
Compression19:1
Bore/Stroke3.437x4.00 inches [87 x 102 mm]
Coolant capacity10.6 qts [10.0 L]
Starter volts12
Rated RPM1900
Power17 hp [12.7 kW]

Transmission Information of Farmall, D-217

Transmission variants 1

TypeGear
Gears6 forward and 1 reverse

Mechanical Specs of Farmall, D-217

  • Two-wheel drive
  • Open operator station.
SteeringManual

Power Information of Farmall, D-217

Rear PTO Type540 (1.375)

Three-Point Hitch of Farmall, D-217

Rear TypeI

Where it sits

With 17 HP, the Farmall D-217 sits between F-14 (16 HP) and F-135 (20 HP) in Farmall's range. Its power puts it in the 10th percentile of 1950s models in our database (592 machines).

Frequently asked questions

How much horsepower does the Farmall D-217 have?

The Farmall D-217 delivers 17 HP.

What years was the Farmall D-217 produced?

The Farmall D-217 was produced in 1956-1962.

What engine does the Farmall D-217 have?

The Farmall D-217 is powered by a Diesel, 2-cylinder engine.

What transmission does the Farmall D-217 use?

The Farmall D-217 uses a Gear transmission.

How much does the Farmall D-217 weigh?

The Farmall D-217 weighs 2350 lbs [1065 kg].

Is the Farmall D-217 4WD?

The Farmall D-217 is available in 2WD.

Compare the Farmall D-217 with another model