Ferguson Pony
Power
12 hp[B] hp
Production
1952-1954
Engine
Gasoline, 4-cylinder
Transmission
Unsynchronized gear
Drive
2WD
Introduction
Ferguson Pony Utility Tractor
The Ferguson Pony is a utility tractor manufactured in Woodstock, Ontario, Canada, between 1952 and 1954. It represents a period in agricultural history following the merger of Massey-Harris and Ferguson, during which models were occasionally cross-branded. This compact machine was designed for general agricultural tasks on smaller operations.
Engine and Powertrain
The tractor is powered by a liquid-cooled Continental N62 gasoline engine. This 4-cylinder unit features a displacement of 62 cubic inches (1.0 L) and a bore/stroke ratio of 2.375 by 3.50 inches. The engine operates at a rated speed of 1800 RPM. Air filtration is managed by an oil bath cleaner, and the engine includes a 3.8-liter oil capacity and a 6.6-liter coolant capacity. Power is delivered through a mechanical dry disc clutch to an unsynchronized gear transmission, providing three forward gears and one reverse gear.
Mechanical Specifications and Hydraulics
The Ferguson Pony utilizes a two-wheel drive configuration paired with manual steering. Braking is handled by differential mechanical contracting band brakes. The optional hydraulic system features a pump flow rate of 2.5 gallons per minute (9.5 liters per minute) and a system capacity of 1.5 liters. A rear power take-off (PTO) operating at 540 RPM is available for implement attachment.
Dimensions and Chassis
The tractor features a wheelbase of 66 inches (167 cm) and an overall height of 60 inches (152 cm). To accommodate varying row crops, the tread width is adjustable, with the front tread ranging from 45 to 75.5 inches and the rear tread from 41 to 72 inches. The machine is equipped with 4.00x-15 front agricultural tires and is compatible with either 8-24 or 9-24 rear agricultural tires.
Conclusion
With its 12-horsepower engine and manual transmission, the Ferguson Pony is categorized as a light utility tractor. Its adjustable track widths and straightforward mechanical design make it suitable for maintenance and smaller-scale cultivation tasks, reflecting the utilitarian engineering standards of the early 1950s.
Production Information of Ferguson, Pony
- After Massey-Harris and Ferguson merged, several models were sold under the brand of the other manufacturer.
- Utility tractor
- Built in Woodstock, Ontario, Canada
| Manufacturer | Ferguson |
|---|
Dimension and Tires Information of Ferguson, Pony
| Wheelbase | 66 inches [167 cm] |
|---|---|
| Rear tread | 41 to 72 inches [104 to 182 cm] |
| Height | 60 inches [152 cm] |
| Front tread | 45 to 75.5 inches [114 to 191 cm] |
| Ag front | 4.00x-15 |
|---|---|
| Ag rear | 8-24 |
| Ag rear | 9-24 |
Engine Specifications of Ferguson, Pony
- Continental N62
- Liquid-cooled
- Gasoline
- 4-cylinder
| Coolant capacity | 7 qts [6.6 L] |
|---|---|
| Displacement | 62 ci [1.0 L] |
| Compression | 6.5:1 |
| Bore/Stroke | 2.375x3.50 inches [60 x 89 mm] |
| Sparkplug | Champion 18625A |
| Oil capacity | 4 qts [3.8 L] |
| Rated RPM | 1800 |
| Air cleaner | Oil bath |
Transmission Information of Ferguson, Pony
Transmission variants 1
| Type | Unsynchronized gear |
|---|---|
| Oil capacity | 3.6 qts [3.4 L] |
| Gears | 3 forward and 1 reverse |
| Clutch | Mechanical dry disc |
Mechanical Specs of Ferguson, Pony
- Two-wheel drive
- Open operator station.
- Differential mechanical contracting band brakes
- Manual steering
| Final drives | Bull gear |
|---|
Power Information of Ferguson, Pony
| Rear PTO | Optional |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of Ferguson, Pony
| Type | Optional |
|---|---|
| Capacity | 0.4 gal [1.5 L] |
| Pump flow | 2.5 gpm [9.5 lpm] |
Electrical System of Ferguson, Pony
| Charging system | Generator |
|---|
Where it sits
With 12 hp[B] HP, the Ferguson Pony sits just below A (20 HP) in Ferguson's range. Its power puts it in the 4th percentile of 1950s models in our database (592 machines).
Frequently asked questions
How much horsepower does the Ferguson Pony have?
The Ferguson Pony delivers 12 hp[B] HP.
What years was the Ferguson Pony produced?
The Ferguson Pony was produced in 1952-1954.
What engine does the Ferguson Pony have?
The Ferguson Pony is powered by a Gasoline, 4-cylinder engine.
What transmission does the Ferguson Pony use?
The Ferguson Pony uses a Unsynchronized gear transmission.
Is the Ferguson Pony 4WD?
The Ferguson Pony is available in 2WD.