Introduction
Production Information of Ford, 1710
The production information of the tractor (1710) includes details about its manufacturing.
| Original price was $8,859 in 1986 |
| Built in Japan |
| Compact Utility tractor |
| Distributor | Ford |
|---|---|
| Manufacturer | Shibaura |
Dimension and Tires Information of Ford, 1710
This section sums up the dimension and tires information of the tractor.
| Rear tread | 43.3 to 58.7 inches [109 to 149 cm] |
|---|---|
| Wheelbase | 63 inches [160 cm] |
| 2WD Front tread | 43.5 to 57.5 inches [110 to 146 cm] |
| Ground clearance | 13.9 inches [35 cm] |
| Length | 117.5 inches [298 cm] |
| 4WD Front tread | 45.3 inches [115 cm] |
| Width | 54.7 inches [138 cm] |
| 2WD Standard tires (ag) | Front: 5.00-15. Rear: 11.2-24 |
|---|---|
| Lawn/turf rear | 13.6x16 |
| 4WD Lawn/turf front | 27x8.50-15 |
| 4WD Standard tires (ag) | Front: 6.00-16. Rear: 11.2-24 |
| 2WD Lawn/turf front | 23x8.50-12 |
Engine Specifications of Ford, 1710
Get the specifications for the engine and if different options are available.
| Shibaura H843 |
| Liquid-cooled inline |
| Diesel |
| 3-cylinder |
| Firing order | 1-2-3 |
|---|---|
| Torque RPM | 1500 |
| Fuel use | 1.873 gal/hour [7.1 l/hour] |
| Starter volts | 12 |
| Pre-heating | Glow plugs |
| Compression | 23:1 |
| Air cleaner | Dry |
| Displacement | 85.2 ci [1.4 L] |
| Power (net) | 26 hp [19.4 kW] |
| Bore/Stroke | 3.31x3.31 inches [84 x 84 mm] |
| Torque | 55.7 lb-ft [75.5 Nm] |
| Oil capacity | 5.6 qts [5.3 L] |
| Coolant capacity | 4.2 qts [4.0 L] |
| Idle RPM | 750-2875 |
| Rated RPM | 2700 |
Transmission Information of Ford, 1710Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears, plus reverse, in four ranges. |
| Type | Unsynchronized gear |
|---|---|
| Oil capacity | 19 qts [18.0 L] |
| Gears | 12 forward and 4 reverse |
| Clutch | 216mm dry disc |
Transmission variants 2
| Type | Partially synchronized |
|---|---|
| Gears | 12 forward and 4 reverse |
| 12-speed unsynchronized gear |
| 12-speed partially synchronized |
Mechanical Specs of Ford, 1710Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-post fixed ROPS. |
| Two- or four-wheel drive |
| Differential mechanical drum brakes |
| 4WD ((Optional with two-wheel drive.)) Steering | Power |
|---|---|
| 2WD Steering | Manual |
| Final drives | Spur gear |
| Differential lock | Mechanical rear |
Power Information of Ford, 1710Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Engine RPM | 540@2420 |
| Live OptOptional | |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Ford, 1710
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 7.8 gpm [29.5 lpm] |
| Capacity | 4.75 gal [18.0 L] |
| Pressure | 2130 psi [146.9 bar] |
Three-Point Hitch of Ford, 1710
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 1575 lbs [714 kg] |
Electrical System of Ford, 1710
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging volts | 12 |
| Charging system | Alternator |
| Battery AH | 72 |
| Charging amps | 35 |
Frequently asked questions
How much horsepower does the Ford 1710 have?
The Ford 1710 delivers 26 HP.
What years was the Ford 1710 produced?
The Ford 1710 was produced in 1983-1986.
What engine does the Ford 1710 have?
The Ford 1710 is powered by a Diesel, 3-cylinder engine.
What transmission does the Ford 1710 use?
The Ford 1710 uses a Unsynchronized gear transmission.
Is the Ford 1710 4WD?
The Ford 1710 is available in 2WD/4WD.