Introduction
Production Information of Ford, 4600
The production information of the tractor (4600) includes details about its manufacturing.
| Built in São Bernardo do Campo, Brazil |
| Manufacturer | Ford |
|---|
Dimension and Tires Information of Ford, 4600
This section sums up the dimension and tires information of the tractor.
| Rear tread | 52 to 80 inches [132 to 203 cm] |
|---|---|
| Wheelbase | 84.5 inches [214 cm] |
| Clearance (front axle) | 19.5 inches [49 cm] |
| Shipping weight | 4480 lbs [2032 kg] |
| Length | 137.4 inches [348 cm] |
| Front tread | 52 to 80 inches [132 to 203 cm] |
| Height (hood) | 57.5 inches [146 cm] |
| Ag front | 6.00x16 |
|---|---|
| 15x30 | |
| 14x30 | |
| 7.50x16 | |
| 12x38 | |
| Ag rear | 13x28 |
Engine Specifications of Ford, 4600
Get the specifications for the engine and if different options are available.
| Ford OHV 3201 |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Coolant capacity | 11 qts [10.4 L] |
|---|---|
| Compression | 16.3:1 |
| Rated RPM | 2200 |
| Torque RPM | 1400 |
| Torque | 166.7 lb-ft [226.0 Nm] |
| Displacement | 201 ci [3.3 L] |
| Power | 63.1 hp [47.1 kW] |
| Bore/Stroke | 4.4x4.4 inches [112 x 112 mm] |
| Oil capacity | 7 qts [6.6 L] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Ford, 4600Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Gears | 8 forward and 2 reverse |
|---|---|
| Clutch | 306mm dry disc |
| Oil capacity | 13.7 qts [13.0 L] |
Mechanical Specs of Ford, 4600Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Wet disc brakes |
| Open operator station. |
| Hydrostatic power OptOptional | |
| Differential lock | Mechanical rear |
| Steering | Mechanical |
Power Information of Ford, 4600Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@1800 |
Hydraulics Specifications of Ford, 4600
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pressure | 2646 psi [182.4 bar] |
| Pump flow | 8.5 gpm [32.2 lpm] |
Three-Point Hitch of Ford, 4600
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Control | Position and draft control |
| Rear lift (at 24"/610mm) | 2535 lbs [1149 kg] |
Electrical System of Ford, 4600
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Battery AH | 60 |
| Charging amps | 27 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Ford 4600 have?
The Ford 4600 delivers 63 HP.
What years was the Ford 4600 produced?
The Ford 4600 was produced in 1976-1984.
What engine does the Ford 4600 have?
The Ford 4600 is powered by a Diesel, 3-cylinder engine.
How much does the Ford 4600 weigh?
The Ford 4600 weighs 4480 lbs [2032 kg].
Is the Ford 4600 4WD?
The Ford 4600 is available in 2WD.