Introduction
Production Information of Ford, 841
The production information of the tractor (841) includes details about its manufacturing.
| Original price was $3,080 in 1957 |
| Utility tractor |
| Built in Highland Park, Michigan, USA |
| Manufacturer | Ford |
|---|
Dimension and Tires Information of Ford, 841
This section sums up the dimension and tires information of the tractor.
| Rear tread | 52 to 76 inches [132 to 193 cm] |
|---|---|
| Wheelbase | 74.5 inches [189 cm] |
| Clearance (front axle) | 21.4 inches [54 cm] |
| Height | 57.3 inches [145 cm] |
| Length | 120.8 inches [306 cm] |
| Front tread | 52 to 80 inches [132 to 203 cm] |
| Width | 64 inches [162 cm] |
| Ag front | 6.00-16 |
|---|---|
| Ag rear | 12-28 |
Engine Specifications of Ford, 841
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 4-cylinder 8-valve |
| Sparkplug gap | 0.027 inches [0.686 mm] |
|---|---|
| Exhaust valve clearance | 0.015 inches (hot) [0.381 mm] |
| Air cleaner | Oil bath |
| Point gap | 0.025 inches [0.635 mm] |
| Rated RPM | 2200 |
| Torque | 140.4 lb-ft [190.4 Nm] |
| Compression | 16.8:1 |
| Displacement | 172 ci [2.8 L] |
| Power | 56.3 hp [42.0 kW] |
| Oil capacity | 5 qts [4.7 L] |
| Bore/Stroke | 3.90x3.60 inches [99 x 91 mm] |
| Starter volts | 12 |
| Intake valve clearance | 0.015 inches (hot) [0.381 mm] |
| Exhaust valve clearance | 0.015 inches (hot) [0.381 mm] |
| Firing order | 1-2-4-3 |
| Torque RPM | 1400 |
Transmission Information of Ford, 841Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Manufacturer | Ford |
|---|---|
| Oil type | SAE 80 |
| Oil capacity | 6 qts [5.7 L] |
| Type | Unsynchronized gear |
| SAE 80 | |
| Gears | 4 forward and 1 reverse |
Transmission variants 2
| Auxiliary gearbox provides over, under, and direct-drive to the basic four-speed transmission. Tractors equipped with the transmission were marked 841S. |
| Transmission | Sherman Step-Up Step-down |
|---|---|
| SAE 80 | |
| Oil type | SAE 80 |
| Gears | 12 forward and 3 reverse |
| Oil capacity | 6 qts [5.7 L] |
| 4-speed unsynchronized gear |
| 12-speed |
Mechanical Specs of Ford, 841Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Differential mechanical expanding shoe brakes |
| Steering | Manual |
|---|---|
| Power assist optional |
Power Information of Ford, 841Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of Ford, 841
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 4 gpm [15.1 lpm] |
| Capacity | 2 gal [7.6 L] |
| Pressure | 2000 psi [137.9 bar] |
Three-Point Hitch of Ford, 841
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift | 1250 lbs [567 kg] |
Electrical System of Ford, 841
Battery voltage, charging system and ground.
| Battery AH | 80 (6V) |
|---|---|
| Ground | Positive (6V) |
| Battery volts | 6 (gas/lp) |
| Charging amps | 20 |
| Negative (12V) | |
| 135 (12V) | |
| 12 (diesel) | |
| Charging system | Generator |
Frequently asked questions
How much horsepower does the Ford 841 have?
The Ford 841 delivers 62 HP.
What years was the Ford 841 produced?
The Ford 841 was produced in 1957-1961.
What engine does the Ford 841 have?
The Ford 841 is powered by a 4-cylinder 8-valve engine.
What transmission does the Ford 841 use?
The Ford 841 uses a Unsynchronized gear transmission.
Is the Ford 841 4WD?
The Ford 841 is available in 2WD.