Introduction
Production Information of Ford, 941
The production information of the tractor (941) includes details about its manufacturing.
| The Ford 941 Powermaster was the only model in the row-crop 901 series to have the four-speed transmission. |
| Row-Crop tractor |
| Built in Highland Park, Michigan, USA |
| Manufacturer | Ford |
|---|
Dimension and Tires Information of Ford, 941
This section sums up the dimension and tires information of the tractor.
| Length | 132.6 inches [336 cm] |
|---|---|
| Front tread | 8.3 to 16.3 inches [21 to 41 cm] |
| Ground clearance | 27.9 inches [70 cm] |
| Height | 65.8 inches [167 cm] |
| Rear tread | 56 to 80 inches [142 to 203 cm] |
| Weight | 3,300 lbs [1496 kg] |
| Ag front | 5.50-16 |
|---|---|
| Ag rear | 12-28 |
Engine Specifications of Ford, 941
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 4-cylinder 8-valve |
| Sparkplug gap | 0.027 inches [0.686 mm] |
|---|---|
| Exhaust valve clearance | 0.015 inches (hot) [0.381 mm] |
| Air cleaner | Oil bath |
| Point gap | 0.025 inches [0.635 mm] |
| Rated RPM | 2200 |
| Torque | 140.4 lb-ft [190.4 Nm] |
| Compression | 16.8:1 |
| Displacement | 172 ci [2.8 L] |
| Power | 56.3 hp [42.0 kW] |
| Oil capacity | 5 qts [4.7 L] |
| Bore/Stroke | 3.90x3.60 inches [99 x 91 mm] |
| Starter volts | 12 |
| Intake valve clearance | 0.015 inches (hot) [0.381 mm] |
| Exhaust valve clearance | 0.015 inches (hot) [0.381 mm] |
| Firing order | 1-2-4-3 |
| Torque RPM | 1400 |
Transmission Information of Ford, 941Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Manufacturer | Ford |
|---|---|
| Oil type | SAE 80 |
| Oil capacity | 6 qts [5.7 L] |
| Type | Unsynchronized gear |
| SAE 80 | |
| Gears | 4 forward and 1 reverse |
Mechanical Specs of Ford, 941Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Differential mechanical expanding shoe brakes |
| Steering | Power assist |
|---|
Power Information of Ford, 941Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of Ford, 941
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 4 gpm [15.1 lpm] |
| Capacity | 2 gal [7.6 L] |
| Pressure | 2000 psi [137.9 bar] |
Three-Point Hitch of Ford, 941
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift | 1,250 lbs [567 kg] |
Electrical System of Ford, 941
Battery voltage, charging system and ground.
| Battery AH | 80 (6V) |
|---|---|
| Ground | Positive (6V) |
| Battery volts | 6 (gas/lp) |
| Charging amps | 20 |
| Negative (12V) | |
| 135 (12V) | |
| 12 (diesel) | |
| Charging system | Generator |
Frequently asked questions
How much horsepower does the Ford 941 have?
The Ford 941 delivers 62 HP.
What years was the Ford 941 produced?
The Ford 941 was produced in 1958-1962.
What engine does the Ford 941 have?
The Ford 941 is powered by a 4-cylinder 8-valve engine.
What transmission does the Ford 941 use?
The Ford 941 uses a Unsynchronized gear transmission.
How much does the Ford 941 weigh?
The Ford 941 weighs 3,300 lbs [1496 kg].
Is the Ford 941 4WD?
The Ford 941 is available in 2WD.