Introduction
Production Information of J.I. Case, 1290
The production information of the tractor (1290) includes details about its manufacturing.
| Original price was $20,100 in 1983 |
| Utility tractor |
| Built in Meltham Mills, Huddersfield, England |
| Manufacturer | J.I. Case |
|---|
Dimension and Tires Information of J.I. Case, 1290
This section sums up the dimension and tires information of the tractor.
| 4WD Clearance (front axle) | 13 inches [33 cm] |
|---|---|
| Wheelbase | 83 inches [210 cm] |
| Max weight | 10,500 lbs [4762 kg] |
| Shipping weight | 5,390 lbs [2444 kg] |
| Length | 135 inches [342 cm] |
| 2WD Clearance (front axle) | 21 inches [53 cm] |
| Height (exhaust) | 88 inches [223 cm] |
| Ag front | 7.50-16 |
|---|---|
| Ag rear | 16.9-30 |
Engine Specifications of J.I. Case, 1290
Get the specifications for the engine and if different options are available.
| J.I. Case |
| The 3.6 liter engine was introduced at serial number 11052369 in tractors with an independent PTO and serial number 11052410 on tractors with a continuous PTO. |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Oil capacity | 7.9 qts [7.5 L] |
|---|---|
| Air cleaner | Dual dry element |
| Displacement | 219 ci [3.6 L] |
| Coolant capacity | 14.8 qts [14.0 L] |
| Starter volts | 12 |
| Rated RPM | 2200 |
| Bore/Stroke | 3.94x4.50 inches [100 x 114 mm] |
Transmission Information of J.I. Case, 1290Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Synchromesh |
|---|---|
| Oil capacity | 28.5 qts [27.0 L] |
| Gears | 12 forward and 4 reverse |
| Clutch | Dry disc |
Mechanical Specs of J.I. Case, 1290Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Two-post ROPS. |
| Power steering |
| Mechanical drum brakes |
Power Information of J.I. Case, 1290Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Independent OptOptional | |
| Rear PTO Type | 540 |
Hydraulics Specifications of J.I. Case, 1290
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 7.25 gpm [27.4 lpm] |
| Capacity | 7.1 gal [26.9 L] |
| Valves | 1 or 2 |
Three-Point Hitch of J.I. Case, 1290
Hitch category and rear/front lift capacity.
| Rear Type | 2/1 |
|---|
Electrical System of J.I. Case, 1290
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 26 |
Frequently asked questions
How much horsepower does the J.I. Case 1290 have?
The J.I. Case 1290 delivers 58 hp[P] HP.
What years was the J.I. Case 1290 produced?
The J.I. Case 1290 was produced in 1980-1983.
What engine does the J.I. Case 1290 have?
The J.I. Case 1290 is powered by a Diesel, 4-cylinder engine.
What transmission does the J.I. Case 1290 use?
The J.I. Case 1290 uses a Synchromesh transmission.
How much does the J.I. Case 1290 weigh?
The J.I. Case 1290 weighs 10,500 lbs [4762 kg].
Is the J.I. Case 1290 4WD?
The J.I. Case 1290 is available in 2WD/4WD.