Introduction
Production Information of J.I. Case, 730
The production information of the tractor (730) includes details about its manufacturing.
| The Case 730 often refers to an entire series of tractors, with a number of engine and chassis options. The specific model 730 was the standard-tread diesel version of the Case 730 series. |
| Standard-tread tractor |
| Built in Racine, Wisconsin, USA |
| Manufacturer | J.I. Case |
|---|---|
| Original price | $5,700 (1969) |
Dimension and Tires Information of J.I. Case, 730
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 102 inches [259 cm] |
|---|---|
| Weight | 7,000 lbs [3175 kg] |
| Height | 84 inches [213 cm] |
| Length | 156 inches [396 cm] |
| Ground clearance | 15 inches [38 cm] |
| Width | 88 inches [223 cm] |
| Ag front | 6.00-16 |
|---|---|
| Ag rear | 14.9-30 |
Engine Specifications of J.I. Case, 730
Get the specifications for the engine and if different options are available.
| J.I. Case |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 267 ci [4.4 L] |
| Rated RPM | 1700 (Dual-Range) |
| Bore/Stroke | 4.125x5.00 inches [105 x 127 mm] |
| Coolant capacity | 30 qts [28.4 L] |
| Oil capacity | 9 qts [8.5 L] |
| Firing order | 1-3-4-2 |
| 1900 (Case-o-Matic) | |
| Compression | 15.2:1 |
Transmission Information of J.I. Case, 730Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Case-o-matic |
|---|---|
| Type | Torque converter |
| Gears | 8 forward and 2 reverse |
Transmission variants 2
| Transmission | Dual-Range |
|---|---|
| Clutch | Mechanical dry disc |
| Type | Unsynchronized |
| Gears | 8 forward and 2 reverse |
| 8-speed torque converter |
| 8-speed unsynchronized |
Mechanical Specs of J.I. Case, 730Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Steering | Manual |
|---|---|
| Power optional |
Power Information of J.I. Case, 730Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
| 1000 |
Hydraulics Specifications of J.I. Case, 730
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 15.5 gpm [58.7 lpm] |
| Capacity | 17 gal [64.3 L] |
| Valves | 4 |
Three-Point Hitch of J.I. Case, 730
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift | 1,350 lbs [612 kg] |
| Type | Case Eagle Hitch |
Electrical System of J.I. Case, 730
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 70 |
| Batteries | 2 |
| Charging system | Generator |
| Battery volts | 6 |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the J.I. Case 730 have?
The J.I. Case 730 delivers 62 hp[P] HP.
What years was the J.I. Case 730 produced?
The J.I. Case 730 was produced in 1960-1969.
What engine does the J.I. Case 730 have?
The J.I. Case 730 is powered by a Diesel, 4-cylinder engine.
What transmission does the J.I. Case 730 use?
The J.I. Case 730 uses a Case-o-matic transmission.
How much does the J.I. Case 730 weigh?
The J.I. Case 730 weighs 7,000 lbs [3175 kg].
Is the J.I. Case 730 4WD?
The J.I. Case 730 is available in 2WD.