Introduction
Production Information of J.I. Case, 995
The production information of the tractor (995) includes details about its manufacturing.
| Original price was $10,500 in 1976 |
| Utility tractor |
| Built in Meltham Mills, Huddersfield, England |
| Manufacturer | J.I. Case |
|---|
Dimension and Tires Information of J.I. Case, 995
This section sums up the dimension and tires information of the tractor.
| Clearance (drawbar) | 16 inches [40 cm] |
|---|---|
| Wheelbase | 82 inches [208 cm] |
| Height (cab) | 95 inches [241 cm] |
| Height (hood) | 58.5 inches [148 cm] |
| Length | 126 inches [320 cm] |
| Rear tread | 52 to 76 inches [132 to 193 cm] |
| Clearance (front axle) | 21 inches [53 cm] |
| Width | 67 inches*Minimum width [170 cm] |
| Ag front | 7.50-16 |
|---|---|
| 16.4/14-30 | |
| Ag rear | 12.4/11-36 |
| Ag rear | 13.6/12-36 |
| Ag front | 6.00-19 |
Engine Specifications of J.I. Case, 995
Get the specifications for the engine and if different options are available.
| David Brown |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Coolant capacity | 14 qts [13.2 L] |
|---|---|
| Displacement | 219.3 ci [3.6 L] |
| Compression | 17:1 |
| Bore/Stroke | 3.94x4.50 inches [100 x 114 mm] |
| Operating RPM | 700-2200 |
| Rated RPM | 2200 |
| Power (gross) | 62 hp [46.2 kW] |
Transmission Information of J.I. Case, 995Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears, plus reverse, in four ranges. Synchronized up-shifts from 1-to-2 and 2-to-3. Synchronized down-shift from 3-to-2. |
| Type | Synchromesh |
|---|---|
| Gears | 12 forward and 4 reverse |
| Clutch | 250mm dry disc |
Mechanical Specs of J.I. Case, 995Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. Quiet Cab optional. |
| Hydraulic drum brakes |
| Power steering |
| Final drives | Spur gear |
|---|
Power Information of J.I. Case, 995Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live |
|---|---|
| 1000@2000 | |
| Rear PTO Type | 540/1000 |
| Engine RPM | 540@1800 |
Hydraulics Specifications of J.I. Case, 995
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 7.4 gpm [28.0 lpm] |
Three-Point Hitch of J.I. Case, 995
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Rear lift | 2000 lbs [907 kg] |
Electrical System of J.I. Case, 995
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Battery volts | 12 |
| Battery AH | 96 |
Frequently asked questions
How much horsepower does the J.I. Case 995 have?
The J.I. Case 995 delivers 62 HP.
What years was the J.I. Case 995 produced?
The J.I. Case 995 was produced in 1976-1980.
What engine does the J.I. Case 995 have?
The J.I. Case 995 is powered by a Diesel, 4-cylinder engine.
What transmission does the J.I. Case 995 use?
The J.I. Case 995 uses a Synchromesh transmission.
Is the J.I. Case 995 4WD?
The J.I. Case 995 is available in 2WD.