Introduction
Production Information of J.I. Case, 1294
The production information of the tractor (1294) includes details about its manufacturing.
| Utility tractor |
| Built in Meltham Mills, Huddersfield, England |
| Manufacturer | J.I. Case |
|---|---|
| Original price | $21,200 (1984) |
Dimension and Tires Information of J.I. Case, 1294
This section sums up the dimension and tires information of the tractor.
| Front tread | 52 to 72 inches [132 to 182 cm (2WD)] |
|---|---|
| Wheelbase | 83 inches (2WD) [210 cm] |
| Ground clearance | 13.5 inches (4WD) [34 cm] |
| Height (cab) | 99 inches [251 cm] |
| 84.25 inches (4WD) [213 cm] | |
| Front tread | 60 to 76 inches [152 to 193 cm (4WD)] |
| 15 inches (2WD) [38 cm] | |
| Width | 70 inches [177 cm] |
| Rear tread | 56 to 80 inches [142 to 203 cm] |
| Ag front | 7.50-16 (2WD) |
|---|---|
| 13.6-36 | |
| 12.4-24 (4WD) | |
| Ag rear | 13.6-38 |
Engine Specifications of J.I. Case, 1294
Get the specifications for the engine and if different options are available.
| J.I. Case |
| Liquid-cooled |
| 4-cylinder |
| Diesel |
| Compression | 17:1 |
|---|---|
| Torque RPM | 1250 |
| Displacement | 219 ci [3.6 L] |
| Bore/Stroke | 3.937x4.50 inches [100 x 114 mm] |
| Power | 62 hp [46.2 kW] |
| Torque | 164.5 lb-ft [223.1 Nm] |
| Rated RPM | 2200 |
| Coolant capacity | 14.4 qts [13.6 L] |
| Oil capacity | 7.8 qts [7.4 L] |
| Starter volts | 12 |
Transmission Information of J.I. Case, 1294Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Synchromesh |
|---|---|
| Gears | 12 forward and 4 reverse |
| Oil capacity | 28.9 qts [27.4 L] |
Mechanical Specs of J.I. Case, 1294Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Cab standard. |
| Drum brakes |
| Differential lock | Mechanical rear |
|---|---|
| Steering | Hydrostatic power |
Power Information of J.I. Case, 1294Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of J.I. Case, 1294
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 7.7 gpm [29.1 lpm] |
| Pump flow | 7.1 gpm [26.9 lpm] |
| Pressure | 2460 psi [169.6 bar] |
| Valves | 1 to 3 |
Three-Point Hitch of J.I. Case, 1294
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Rear lift (at 24"/610mm) | 2,970 lbs [1347 kg] |
Electrical System of J.I. Case, 1294
Battery voltage, charging system and ground.
| Battery AH | 96 |
|---|---|
| Ground | Negative |
| 550 (heavy-duty) | |
| Battery CCA | 420 |
| Charging system | Alternator |
| 128 (heavy-duty) | |
| Battery volts | 12 |
| Charging amps | 45 |
Frequently asked questions
How much horsepower does the J.I. Case 1294 have?
The J.I. Case 1294 delivers 62 HP.
What years was the J.I. Case 1294 produced?
The J.I. Case 1294 was produced in 1983-1984.
What engine does the J.I. Case 1294 have?
The J.I. Case 1294 is powered by a Diesel, 4-cylinder engine.
What transmission does the J.I. Case 1294 use?
The J.I. Case 1294 uses a Synchromesh transmission.
Is the J.I. Case 1294 4WD?
The J.I. Case 1294 is available in 2WD/4WD.