John Deere 1025R
Power
23 hp
Production
2013-2023
Transmission
Hydrostatic
Weight
1444 lbs [654 kg]
Drive
4WD
From the same series:
Introduction
Production Information of John Deere, 1025R
The production information of the tractor (1025R) includes details about its manufacturing.
| Sub-Compact Utility tractor |
| Built in Augusta, Georgia, USA |
| Manufacturer | John Deere |
|---|---|
| $14,301 (2019 ) | |
| Original price | $13,361 (2013 ) |
Dimension and Tires Information of John Deere, 1025R
This section sums up the dimension and tires information of the tractor.
| Flanged rear axle |
| Front tread | 32.2 inches [81 cm] |
|---|---|
| Wheelbase | 57.1 inches [145 cm] |
| Width | 47.2 inches (R3 tires) [119 cm] |
| 177 inches (loader-backhoe) [449 cm] | |
| Length | 87.6 inches [222 cm] |
| Shipping weight | 1444 lbs [654 kg] |
| Height (hood) | 41.5 inches [105 cm] |
| 102.6 inches (with hitch) [260 cm] | |
| Rear tread | 35.2 inches [89 cm] |
| Clearance (front axle) | 7.7 inches [19 cm] |
| Height (ROPS) | 86.2 inches [218 cm] |
| Lawn/turf front | 18x8.50-10 |
|---|---|
| Industrial rear | 26x12-12 |
| Lawn/turf rear | 26x12-12 |
| Industrial front | 18x8.50-10 |
Engine Specifications of John Deere, 1025R
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Operating RPM | 1575-3370 |
|---|---|
| Coolant capacity | 3.9 qts [3.7 L] |
| Rated RPM | 3200 |
| Starter volts | 12 |
| Power | 23.8 hp [17.7 kW] |
| Torque | 40.7 lb-ft [55.2 Nm] |
| Starter power | 1.6 hp [1.2 kW] |
| Air cleaner | Dry |
| Pre-heating | Glow plugs |
| Fuel system | Indirect injection |
| Displacement | 77.2 ci [1.3 L] |
| Emissions | Tier 4 |
| Oil capacity | 2.9 qts [2.7 L] |
| Oil change | 200 h |
| Bore/Stroke | 3.15x3.31 inches [80 x 84 mm] |
| Compression | 23.5:1 |
| Torque RPM | 3200 |
| Starter | Electric |
| Coolant heater OptOptional | |
| Block heater OptOptional |
Transmission Information of John Deere, 1025RY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
| Oil capacity | 13 qts [12.3 L] |
Mechanical Specs of John Deere, 1025RY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Wet disc brakes |
| Power steering |
| Two-post foldable ROPS on semi-flat platform. |
| Final drives | Spur gear |
|---|---|
| Differential lock | Mechanical rear |
Power Information of John Deere, 1025RY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Engine RPM | 2100@3200 |
|---|---|
| Rear PTO | Independent |
| Mid PTO | Independent |
| Engine RPM | 540@3200 |
| Clutch | Wet disc |
| Mid PTO Type | 2100 |
| Rear PTO Type | 540 |
Hydraulics Specifications of John Deere, 1025R
Hydraulic system type, pressure, pump flow and valves.
| Steering flow | 2.8 gpm [10.6 lpm] |
|---|---|
| Type | Open center |
| Pump flow | 3.5 gpm [13.2 lpm] |
| Valves | 2 or 3 |
| Capacity | 3.25 gal [12.3 L] |
| Total flow | 6.3 gpm [23.8 lpm] |
| Pressure | 2000 psi [137.9 bar] |
Three-Point Hitch of John Deere, 1025R
Hitch category and rear/front lift capacity.
| Rear Type | I (limited) |
|---|---|
| Control | Position control |
| Rear lift (at 24"/610mm) | 681 lbs [308 kg] |
Electrical System of John Deere, 1025R
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Battery CCA | 500 |
Frequently asked questions
How much horsepower does the John Deere 1025R have?
The John Deere 1025R delivers 23 HP.
What years was the John Deere 1025R produced?
The John Deere 1025R was produced in 2013-2023.
What transmission does the John Deere 1025R use?
The John Deere 1025R uses a Hydrostatic transmission.
How much does the John Deere 1025R weigh?
The John Deere 1025R weighs 1444 lbs [654 kg].
Is the John Deere 1025R 4WD?
The John Deere 1025R is available in 4WD.