Introduction
Production Information of John Deere, 1026R
The production information of the tractor (1026R) includes details about its manufacturing.
| Sub-Compact Utility tractor |
| Built in Augusta, Georgia, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 1026R
This section sums up the dimension and tires information of the tractor.
| Flanged rear axle |
| Clearance (front axle) | 12.3 inches [31 cm] |
|---|---|
| Wheelbase | 57.1 inches [145 cm] |
| Height (hood) | 41.5 inches [105 cm] |
| Width | 47.2 inches (R3 tires) [119 cm] |
| Length | 87.6 inches [222 cm] |
| Height (ROPS) | 78.6 inches [199 cm] |
| 102.6 inches (with hitch) [260 cm] | |
| Rear tread | 35.2 inches [89 cm] |
| Front tread | 32.2 inches [81 cm] |
| Lawn/turf front | 18x8.5-10 |
|---|---|
| Industrial rear | 26x12.00-12 |
| Lawn/turf rear | 26x12.00-12 |
| Industrial front | 18x8.5-10 |
Engine Specifications of John Deere, 1026R
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Starter | Electric |
|---|---|
| Firing order | 1-3-2 |
| Rated Power (gross) | 25.2 hp [18.8 kW] |
| Starter volts | 12 |
| Air cleaner | Dual stage dry |
| Pre-heating | Glow plugs |
| Fuel system | Indirect injection |
| Displacement | 68.1 ci [1.1 L] |
| Rated Power (net) | 23.8 hp [17.7 kW] |
| Oil capacity | 2.9 qts [2.7 L] |
| Oil change | 200 h |
| Bore/Stroke | 2.9x3.2 inches [74 x 81 mm] |
| Operating RPM | 1400-3370 |
| Coolant capacity | 3.9 qts [3.7 L] |
| Coolant change | 2000 h |
| Rated RPM | 3200 |
| Compression | 23.5:1 |
Transmission Information of John Deere, 1026RY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Hydrostatic transmission operated by two foot pedals, left-hand range shift lever, and cruise control. Tractor must be stopped to shift range. |
| Type | Hydrostatic |
|---|---|
| JD Hy-Gard | |
| Oil type | JD Hy-Gard |
| Gears | Infinite forward and reverse (2-range) |
| Oil capacity | 13 qts [12.3 L] |
Mechanical Specs of John Deere, 1026RY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Disc brakes |
| Power steering |
| Two-post ROPS. |
| Final drives | Spur gear |
|---|---|
| Differential lock | Standard |
Power Information of John Deere, 1026RY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2100 |
| Mid PTO | Independent |
| Rear PTO Type | 540 |
| Engine RPM | 2100@3200 |
| Engine RPM | 540@3200 |
Hydraulics Specifications of John Deere, 1026R
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 6.3 gpm [23.8 lpm] |
| Valves | 2 to 3 |
| Capacity | 3.25 gal [12.3 L] |
| Pressure | 2000 psi [137.9 bar] |
Three-Point Hitch of John Deere, 1026R
Hitch category and rear/front lift capacity.
| Rear Type | Limited I |
|---|---|
| Rear lift (at 24"/610mm) | 681 lbs [308 kg] |
| Control | Position control |
| Rear lift (at ends) | 1433 lbs [650 kg] |
Electrical System of John Deere, 1026R
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 500 |
| Charging system | Alternator |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the John Deere 1026R have?
The John Deere 1026R delivers 25 HP.
What years was the John Deere 1026R produced?
The John Deere 1026R was produced in 2011-2012.
What transmission does the John Deere 1026R use?
The John Deere 1026R uses a Hydrostatic transmission.
Is the John Deere 1026R 4WD?
The John Deere 1026R is available in 4WD.