Introduction
Production Information of John Deere, 2520
The production information of the tractor (2520) includes details about its manufacturing.
| Compact Utility tractor |
| Built in Augusta, Georgia, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 2520
This section sums up the dimension and tires information of the tractor.
| Clearance (drawbar) | 11 inches [27 cm] |
|---|---|
| Wheelbase | 65.2 inches [165 cm] |
| Height (hood) | 47.2 inches [119 cm] |
| 52.6 inches (max) [133 cm] | |
| Length | 108.9 inches [276 cm] |
| Operating weight | 1865 lbs [845 kg] |
| Height (ROPS) | 89.7 inches [227 cm] |
| Width | 39.2 inches (min) [99 cm] |
| Rear tread | 37.6 inches [95 cm] |
| Front tread | 32.7 inches [83 cm] |
| Clearance (front axle) | 13 inches [33 cm] |
| Ground clearance | 12.5 inches [31 cm] |
| Height (Folded ROPS) | 68.9 inches [175 cm] |
| Lawn/turf front | 24x8.5-14 |
|---|---|
| Industrial rear | 14-17.5 |
| Lawn/turf rear | 36x14.00-15 |
| Industrial front | 23x8.5-12 |
Engine Specifications of John Deere, 2520
Get the specifications for the engine and if different options are available.
| Yanmar 3TNV82A |
| Liquid-cooled |
| 3-cylinder |
| Diesel |
| Compression | 19.2:1 |
|---|---|
| Torque RPM | 2600 |
| Displacement | 81.2 ci [1.3 L] |
| Bore/Stroke | 3.23x3.31 inches [82 x 84 mm] |
| Rated Power (gross) | 26.4 hp [19.7 kW] |
| Torque | 51.3 lb-ft [69.6 Nm] |
| Rated RPM | 2600 |
| Coolant capacity | 4.1 qts [3.9 L] |
| Oil capacity | 3.8 qts [3.6 L] |
| Starter volts | 12 |
Transmission Information of John Deere, 2520Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
| Oil capacity | 15.6 qts [14.8 L] |
Mechanical Specs of John Deere, 2520Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Final drives | Spur gear |
|---|---|
| Steering | Power |
Power Information of John Deere, 2520Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2100 |
| Rear PTO Type | 540 |
| Mid PTO | Standard |
Hydraulics Specifications of John Deere, 2520
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 10.5 gpm [39.7 lpm] |
| Pump flow | 5.0 gpm [18.9 lpm] |
| Capacity | 3.85 gal [14.6 L] |
| Valves | 2 |
Three-Point Hitch of John Deere, 2520
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 1150 lbs [521 kg] |
| Control | Position control |
| Rear lift (at ends) | 1433 lbs [650 kg] |
Electrical System of John Deere, 2520
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 500 |
| Charging system | Alternator |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the John Deere 2520 have?
The John Deere 2520 delivers 26 HP.
What years was the John Deere 2520 produced?
The John Deere 2520 was produced in 2005-2011.
What engine does the John Deere 2520 have?
The John Deere 2520 is powered by a Diesel, 3-cylinder engine.
What transmission does the John Deere 2520 use?
The John Deere 2520 uses a Hydrostatic transmission.
How much does the John Deere 2520 weigh?
The John Deere 2520 weighs 1865 lbs [845 kg].
Is the John Deere 2520 4WD?
The John Deere 2520 is available in 4WD.