John Deere 2720 tractor

John Deere 2720

Power

31 hp

Production

2008-2012

Engine

3-cylinder

Transmission

Hydrostatic

Weight

1,973 lbs [894 kg]

Drive

4WD

From the same series:

2520

Introduction

Production Information of John Deere, 2720

The production information of the tractor (2720) includes details about its manufacturing.

Compact Utility tractor
Built in Augusta, Georgia, USA
ManufacturerJohn Deere

Dimension and Tires Information of John Deere, 2720

This section sums up the dimension and tires information of the tractor.

Clearance (front axle)13 inches [33 cm]
Wheelbase65.2 inches [165 cm]
Operating weight1,973 lbs [894 kg]
52.6 inches (max) [133 cm]
Length108.9 inches [276 cm]
Clearance (drawbar)11 inches [27 cm]
Max weight4,366 lbs [1980 kg]
Width39.2 inches (min) [99 cm]
Rear tread37.6 inches [95 cm]
Front tread32.7 inches [83 cm]
Lawn/turf front23x8.5-12
Industrial rear14-17.5
Lawn/turf rear36x14.00-15
Industrial front23x8.5-12

Engine Specifications of John Deere, 2720

Get the specifications for the engine and if different options are available.

Liquid-cooled
3-cylinder
Air cleanerDry dual element
Operating RPM1200-2650
Oil capacity3.6 qts [3.4 L]
Displacement100.2 ci [1.6 L]
Bore/Stroke3.46x3.54 inches [88 x 90 mm]
Rated Power (gross)31.4 hp [23.4 kW]
Rated RPM2500
Compression19.1:1
Coolant capacity4.2 qts [4.0 L]
Starter power1.4 hp [1.0 kW]
Starter volts12

Transmission Information of John Deere, 2720Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Two-range hydrostatic operated with foot pedals. Tractor but be stopped to shift ranges.
TypeHydrostatic
Hy-Gard
Oil typeHy-Gard
GearsInfinite forward and reverse (2-range)
Oil capacity15.6 qts [14.8 L]

Mechanical Specs of John Deere, 2720Y

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive
Two-post folding ROPS.
Wet disc brakes
Final drivesSpur gear
SteeringPower

Power Information of John Deere, 2720Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Rear PTO Type540
Mid PTO Type2100

Hydraulics Specifications of John Deere, 2720

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
Total flow10.5 gpm [39.7 lpm]
Pump flow5.0 gpm [18.9 lpm]
Pressure2421 psi [166.9 bar]
Steering flow5.5 gpm [20.8 lpm]
Valves2

Three-Point Hitch of John Deere, 2720

Hitch category and rear/front lift capacity.

Rear TypeI
Rear lift (at 24"/610mm)1250 lbs [567 kg]
ControlPosition control
Rear lift (at ends)1433 lbs [650 kg]

Electrical System of John Deere, 2720

Battery voltage, charging system and ground.

GroundNegative
Battery volts12
Battery CCA500
Charging systemAlternator
Charging amps40

Frequently asked questions

How much horsepower does the John Deere 2720 have?

The John Deere 2720 delivers 31 HP.

What years was the John Deere 2720 produced?

The John Deere 2720 was produced in 2008-2012.

What engine does the John Deere 2720 have?

The John Deere 2720 is powered by a 3-cylinder engine.

What transmission does the John Deere 2720 use?

The John Deere 2720 uses a Hydrostatic transmission.

How much does the John Deere 2720 weigh?

The John Deere 2720 weighs 1,973 lbs [894 kg].

Is the John Deere 2720 4WD?

The John Deere 2720 is available in 4WD.

Compare the John Deere 2720 with another model