Introduction
Production Information of John Deere, 3032E
The production information of the tractor (3032E) includes details about its manufacturing.
| Compact Utility tractor |
| Built in Augusta, Georgia, USA |
| Manufacturer | John Deere |
|---|---|
| $18,953 (2016 ) | |
| Original price | $13,619 (2009 ) |
Dimension and Tires Information of John Deere, 3032E
This section sums up the dimension and tires information of the tractor.
| Operating weight | 2175 lbs [986 kg] |
|---|---|
| Wheelbase | 60 inches [152 cm] |
| Height (hood) | 51 inches [129 cm] |
| 58 inches (max) [147 cm] | |
| Length | 111 inches [281 cm] |
| Max weight | 4410 lbs [2000 kg] |
| Height (ROPS) | 82.3 inches [209 cm] |
| Width | 56.5 inches (min) [143 cm] |
| Ag front | 7.00-14 |
|---|---|
| Industrial front | 25x8.5-14 |
| Lawn/turf rear | 41x14.0-20 |
| Ag rear | 11.2-24 |
| Industrial rear | 15.00-19.5 |
| Lawn/turf front | 27x8.5-15 |
Engine Specifications of John Deere, 3032E
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 3-cylinder |
| Coolant capacity | 4.4 qts [4.2 L] |
|---|---|
| Air cleaner | Dry type |
| Compression | 19:1 |
| Torque | 80 lb-ft [108.5 Nm] |
| Rated RPM | 2400 |
| Displacement | 95.7 ci [1.6 L] |
| Oil capacity | 4.8 qts [4.5 L] |
| Power | 31.0 hp [23.1 kW] |
| Bore/Stroke | 3.50x3.54 inches [89 x 90 mm] |
| Starter power | 1.9 hp [1.4 kW] |
| Starter volts | 12 |
| Torque RPM | 1680 |
Transmission Information of John Deere, 3032EY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Mechanically-controlled two-range hydrostatic transmission. Tractor must be stopped before shifting ranges. |
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
| Oil capacity | 22 qts*The 2014 printing of the operator manual incorrectly lists the capacity as 14L. [20.8 L] |
Mechanical Specs of John Deere, 3032EY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Power steering |
| Wet disc brakes |
Power Information of John Deere, 3032EY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of John Deere, 3032E
Hydraulic system type, pressure, pump flow and valves.
| Steering press. | 1500 psi [103.4 bar] |
|---|---|
| Type | Open center |
| Total flow | 9.3 gpm [35.2 lpm] |
| Pump flow | 5.3 gpm [20.1 lpm] |
| Capacity | 5.5 gal [20.8 L] |
| Steering flow | 4.0 gpm [15.1 lpm] |
| Pressure | 2500 psi [172.4 bar] |
Three-Point Hitch of John Deere, 3032E
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 1356 lbs [615 kg] |
Electrical System of John Deere, 3032E
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 500 |
| Charging system | Alternator |
| Battery Group | 22NF |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the John Deere 3032E have?
The John Deere 3032E delivers 31 HP.
What years was the John Deere 3032E produced?
The John Deere 3032E was produced in 2008-2023.
What engine does the John Deere 3032E have?
The John Deere 3032E is powered by a 3-cylinder engine.
What transmission does the John Deere 3032E use?
The John Deere 3032E uses a Hydrostatic transmission.
How much does the John Deere 3032E weigh?
The John Deere 3032E weighs 2175 lbs [986 kg].
Is the John Deere 3032E 4WD?
The John Deere 3032E is available in 4WD.