Introduction
John Deere 4310 Compact Utility Tractor
The John Deere 4310 is a compact utility tractor manufactured between 2002 and 2004 in Augusta, Georgia, USA. Part of the 4000 series, this model is designed for versatile agricultural and maintenance tasks, offering a balance of power and maneuverability.
Engine and Power
The tractor is powered by a Yanmar 3TNE84 liquid-cooled, 3-cylinder diesel engine with a displacement of 1.5 liters. It produces a gross power output of 31.2 hp (23.3 kW) at a rated speed of 2600 RPM. The engine features a 18.5:1 compression ratio and uses a dry-type air cleaner.
Transmission Options
The 4310 offers three distinct transmission configurations: the SyncShift, a partially synchronized transmission with 9 forward and 3 reverse gears; the eHydro, a 3-range hydrostatic transmission providing infinite speed control via foot pedals; and the ePowrReverser, a power shuttle transmission with 12 forward and 12 reverse gears allowing for direction changes without using the clutch.
Hydraulics and PTO
The open-center hydraulic system delivers a total flow of 13.9 gpm (52.6 lpm) at a pressure of 2500 psi. It supports up to 5 valves. The rear PTO operates independently at 540 RPM, and an optional independent mid-PTO is available for attachments such as mower decks.
Mechanical and Hitch
Built with a choice of two- or four-wheel drive, the tractor utilizes power steering and wet disc brakes for operator control. The rear Category I hitch features a lift capacity of 2,200 lbs (997 kg) at 24 inches behind the lift points, suitable for a wide array of implements.
Conclusion
The John Deere 4310 is a reliable utility tractor suitable for small to medium-scale farming operations and property maintenance, providing high flexibility through its diverse transmission choices and robust hydraulic capacity.
Production Information of John Deere, 4310
- Compact Utility tractor
- Built in Augusta, Georgia, USA
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 4310
| Wheelbase | 68 inches [172 cm] |
|---|---|
| Ground clearance | 13.4 inches [34 cm] |
| Length | 117 inches [297 cm] |
| Width | 50 inches [127 cm] |
| Ag front | 5.00-15 (2WD) |
|---|---|
| Ag front(optional) | 7.00-14 (4WD) |
| Ag rear | 11.2-24 |
Engine Specifications of John Deere, 4310
- Yanmar 3TNE84
- Liquid-cooled
- 3-cylinder
- Diesel
| Compression | 18.5:1 |
|---|---|
| Starter volts | 12 |
| Displacement | 92 ci [1.5 L] |
| Power (gross) | 31.2 hp [23.3 kW] |
| Air cleaner | Dry |
| Idle RPM | 1000-2810 |
| Rated RPM | 2600 |
| Coolant capacity | 6 qts [5.7 L] |
| Oil capacity | 4.5 qts [4.3 L] |
| Starter power | 1.9 hp [1.4 kW] |
Transmission Information of John Deere, 4310
Transmission variants 1
- Three gears (1-3) plus reverse in three ranges (A-C). Gears can be shifted on the move using the clutch. Tractor must be stopped to shift ranges.
| Transmission | SyncShift |
|---|---|
| Oil capacity | 25.2 qts [23.8 L] |
| Type | Partially synchronized |
| Gears | 9 forward and 3 reverse |
Transmission variants 2
- Three-range hydrostatic transmission with foot pedals and cruise control. Tractor must be stopped to shift ranges. Automotive cruise control option allows set speed to be adjusted with rocker switch. SpeedMatch option allows a maximum speed to be set and full pedal travel used to achive that speed. LoadMatch option prevents the tractor from stalling during heavy loads. The MotionMatch option enables the acceleration rate to be set to fast or slow.
| Transmission | EHydro |
|---|---|
| Oil capacity | 27.2 qts [25.7 L] |
| Type | Hydrostatic |
| Gears | Infinite forward and reverse (3-range) |
Transmission variants 3
- Four gears (1-4) in three ranges (A-C) with reverser lever. Gears are synchronized and may be shifted on the move using the clutch. Tractor must be stopped to shift ranges. Forward/reverse direction changes may be done on the move, without the clutch, by using the reverser lever.
| Transmission | EPowrReverser |
|---|---|
| Oil capacity | 25.2 qts [23.8 L] |
| Type | Power shuttle |
| Gears | 12 forward and reverse |
- 9-speed partially synchronized
- Hydrostatic
- 12-speed power shuttle
Mechanical Specs of John Deere, 4310
- Two- or four-wheel drive
- Wet disc brakes
- Two-post fixed ROPS. Two-post folding ROPS optional.
| Steering | Power |
|---|---|
| Final drives | Spur gear |
| Differential lock | Mechanical rear |
Power Information of John Deere, 4310
| Rear PTO | Independent |
|---|---|
| Mid PTO(optional) | Independent |
| Engine RPM | 540@2600 |
| Clutch | Wet disc |
| Mid PTO Type | 2100 |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of John Deere, 4310
| Total flow | 13.9 gpm [52.6 lpm] |
|---|---|
| Type | Open center |
| Valves | 5 |
| Pressure | 2500 psi [172.4 bar] |
| Capacity | 6.3 gal (gear) [23.8 L] |
| Steering flow | 5.3 gpm [20.1 lpm] |
| Pump flow | 8.6 gpm [32.6 lpm] |
| Pump flow(optional) | 6.8 gal (hydro) [25.7 L] |
Three-Point Hitch of John Deere, 4310
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 2,200 lbs [997 kg] |
Electrical System of John Deere, 4310
| Ground | Negative |
|---|---|
| Battery CCA | 500 |
| Battery CCA(optional) | 55 (optional) |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 40 |
Where it sits
With 31 HP, the John Deere 4310 sits between 4210 (27 HP) and 4300 (32 HP) in John Deere's range. Its power puts it in the 17th percentile of 2000s models in our database (2822 machines).
Frequently asked questions
How much horsepower does the John Deere 4310 have?
The John Deere 4310 delivers 31 HP.
What years was the John Deere 4310 produced?
The John Deere 4310 was produced in 2002-2004.
What engine does the John Deere 4310 have?
The John Deere 4310 is powered by a Diesel, 3-cylinder engine.
What transmission does the John Deere 4310 use?
The John Deere 4310 uses a SyncShift transmission.
Is the John Deere 4310 4WD?
The John Deere 4310 is available in 2WD/4WD.