John Deere 3025E
Power
24 hp
Production
2017+
Engine
Diesel, 3-cylinder
Transmission
Hydrostatic
Drive
4WD
From the same series:
Introduction
Production Information of John Deere, 3025E
The production information of the tractor (3025E) includes details about its manufacturing.
| Compact Utility tractor |
| Built in Augusta, Georgia, USA |
| Manufacturer | John Deere |
|---|---|
| $18,330 (2020 ) | |
| Original price | $17,324 (2017 ) |
Dimension and Tires Information of John Deere, 3025E
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 60 inches [152 cm] |
|---|---|
| Length | 152.4 inches [387 cm] |
| Height (ROPS) | 95.3 inches [242 cm] |
| Ag front | 7-14 |
|---|---|
| Industrial front | 25x8.5-14 |
| Lawn/turf rear | 41x14-20 |
| Ag rear | 11.2-24 |
| Industrial rear | 15-19.5 |
| Lawn/turf front | 27x8.5-15 |
Engine Specifications of John Deere, 3025E
Get the specifications for the engine and if different options are available.
| Yanmar 3TNV88F |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Starter power | 1.9 hp [1.4 kW] |
|---|---|
| Starter volts | 12 |
| Power (gross) | 24.4 hp [18.2 kW] |
| Oil capacity | 4.7 qts [4.4 L] |
| Air cleaner | Dual dry element |
| Compression | 19.1:1 |
| Fuel system | High-pressure common rail direct injection |
| Displacement | 100.2 ci [1.6 L] |
| Emissions | Tier 4 |
| Bore/Stroke | 3.46x3.54 inches [88 x 90 mm] |
| Starter | Electric |
| Coolant capacity | 5.2 qts [4.9 L] |
| Idle RPM | 950-2550 |
| Rated RPM | 2400 |
Transmission Information of John Deere, 3025EY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of John Deere, 3025EY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Power steering |
| Final drives | Spur gear |
|---|---|
| Differential lock | Mechanical rear |
Power Information of John Deere, 3025EY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@2500 |
Hydraulics Specifications of John Deere, 3025E
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 9.3 gpm [35.2 lpm] |
| Pump flow | 5.3 gpm [20.1 lpm] |
| Pressure | 2500 psi [172.4 bar] |
| Steering flow | 4 gpm [15.1 lpm] |
| Valves | 0 to 2 |
Three-Point Hitch of John Deere, 3025E
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Control | Position control |
| Rear lift (at 24"/610mm) | 1356 lbs [615 kg] |
Electrical System of John Deere, 3025E
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 500 |
| Charging volts | 12 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 75 |
Frequently asked questions
How much horsepower does the John Deere 3025E have?
The John Deere 3025E delivers 24 HP.
What years was the John Deere 3025E produced?
The John Deere 3025E was produced in 2017+.
What engine does the John Deere 3025E have?
The John Deere 3025E is powered by a Diesel, 3-cylinder engine.
What transmission does the John Deere 3025E use?
The John Deere 3025E uses a Hydrostatic transmission.
Is the John Deere 3025E 4WD?
The John Deere 3025E is available in 4WD.