John Deere 2305
Power
24 hp
Production
2005-2010
Engine
3-cylinder
Transmission
Hydrostatic
Drive
4WD
From the same series:
Introduction
Production Information of John Deere, 2305
The production information of the tractor (2305) includes details about its manufacturing.
| Original price was $11,069 in 2011 |
| Sub-Compact Utility tractor |
| Built in Augusta, Georgia, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 2305
This section sums up the dimension and tires information of the tractor.
| Front tread | 39.6 inches [100 cm] |
|---|---|
| Wheelbase | 57.1 inches [145 cm] |
| Height (ROPS) | 77.5 inches [196 cm] |
| Height (hood) | 42 inches [106 cm] |
| Length | 102.6 inches [260 cm] |
| Rear tread | 33.6 inches [85 cm] |
| Clearance (front axle) | 7.7 inches [19 cm] |
| Width | 44.9 inches [114 cm] |
| Lawn/turf front | 18x8.5-10 |
|---|---|
| Industrial rear | 26x12.00-12 |
| Lawn/turf rear | 26x12.00-12 |
| Industrial front | 18x8.5-10 |
Engine Specifications of John Deere, 2305
Get the specifications for the engine and if different options are available.
| Liquid-cooled inline |
| 3-cylinder |
| Coolant capacity | 3.4 qts [3.2 L] |
|---|---|
| Starter power | 1.6 hp [1.2 kW] |
| Air cleaner | Dual dry element |
| Operating RPM | 1170-3170 |
| Rated RPM | 3000 |
| Displacement | 68 ci [1.1 L] |
| Oil capacity | 3.4 qts [3.2 L] |
| Rated Power (gross) | 24.1 hp [18.0 kW] |
| Compression | 23.4:1 |
| Bore/Stroke | 2.99x3.23 inches [76 x 82 mm] |
| Starter volts | 12 |
| Torque RPM | 3000 |
| Torque | 41.7 lb-ft [56.5 Nm] |
Transmission Information of John Deere, 2305Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Hydrostatic transmission operated with two foot pedals and range-shift lever. Tractor must be stopped to shift ranges. Optional cruise control is engaged by dashboard button. |
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
| Oil capacity | 13.6 qts [12.9 L] |
Mechanical Specs of John Deere, 2305Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post fixed ROPS. |
| Wet disc brakes |
| Power steering |
| Final drives | Spur gear |
|---|
Power Information of John Deere, 2305Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2100 |
| Rear PTO Type | 540 (1.375) |
| Mid PTO | Independent |
Hydraulics Specifications of John Deere, 2305
Hydraulic system type, pressure, pump flow and valves.
| Steering flow | 2.3 gpm [8.7 lpm] |
|---|---|
| Type | Open center |
| Pump flow | 2.9 gpm [11.0 lpm] |
| Valves | 2 |
| Capacity | 3.4 gal [12.9 L] |
| Total flow | 5.2 gpm [19.7 lpm] |
| Pressure | 1987 psi [137.0 bar] |
Three-Point Hitch of John Deere, 2305
Hitch category and rear/front lift capacity.
| Rear Type | I (limited) |
|---|---|
| Rear lift (at ends) | 1433 lbs [650 kg] |
| Rear lift (at 24"/610mm) | 681 lbs [308 kg] |
Electrical System of John Deere, 2305
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 500 |
| Charging system | Alternator |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the John Deere 2305 have?
The John Deere 2305 delivers 24 HP.
What years was the John Deere 2305 produced?
The John Deere 2305 was produced in 2005-2010.
What engine does the John Deere 2305 have?
The John Deere 2305 is powered by a 3-cylinder engine.
What transmission does the John Deere 2305 use?
The John Deere 2305 uses a Hydrostatic transmission.
Is the John Deere 2305 4WD?
The John Deere 2305 is available in 4WD.