Introduction
Production Information of John Deere, 2040
The production information of the tractor (2040) includes details about its manufacturing.
| The European-market John Deere 2040 was unrelated to the earlier North American 2040, being closer to the American 50-series tractors. |
| Utility tractor |
| Built in Mannheim, Baden-Württemberg, Germany |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 2040
This section sums up the dimension and tires information of the tractor.
| 4WD Front tread | 59.1 to 79.1 inches [150 to 200 cm] |
|---|---|
| 2WD Wheelbase | 89.7 inches [227 cm] |
| Width | 81.5 inches [207 cm] |
| 4WD Length | 154.5 inches [392 cm] |
| 4WD Wheelbase | 90 inches [228 cm] |
| 2WD Clearance (front axle) | 25 inches [63 cm] |
| Height (cab) | 104.7 inches [265 cm] |
| 2WD Length | 147.1 inches [373 cm] |
| Rear tread | 59.1 to 78.7 inches [150 to 199 cm] |
| 2WD Front tread | 53.5 to 79.1 inches [135 to 200 cm] |
| 4WD Clearance (front axle) | 16.9 inches [42 cm] |
| Height (exhaust) | 115.2 inches [292 cm] |
| 2WD Standard tires (ag) | Front: 7.50-18. Rear: 13.6/12-38 |
|---|---|
| 4WD Standard tires (ag) | Front: 11.2-28. Rear: 13.6/12-38 |
Engine Specifications of John Deere, 2040
Get the specifications for the engine and if different options are available.
| John Deere |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 239.2 ci [3.9 L] |
| Compression | 16.8:1 |
| Bore/Stroke | 4.19x4.33 inches [106 x 110 mm] |
| Coolant capacity | 19 qts [18.0 L] |
| Oil capacity | 9 qts [8.5 L] |
| Operating RPM | 1300-2500 |
| Rated RPM | 2500 |
| Power | 70 hp [52.2 kW] |
Transmission Information of John Deere, 2040Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four synchronized gears in two ranges (low/high) plus reverse range. |
| Type | Partially synchronized |
|---|---|
| Gears | 8 forward and 4 reverse |
| Oil capacity | 58.1 qts [55.0 L] |
Transmission variants 2
| Hydraulically-shifted high-low added to base transmission. |
| Gears | 16 forward and 8 reverse |
|---|
| 8-speed partially synchronized |
| 16-speed |
Mechanical Specs of John Deere, 2040Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Open operator station. Cab optional. SoundGard (SG2) cab available after 1981. |
| Power steering |
| Hydraulic disc brakes |
Power Information of John Deere, 2040Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Engine RPM | 540@2400 |
| 1000 OptOptional | |
| Clutch | Hydraulic |
| Rear PTO Type | 540 |
Hydraulics Specifications of John Deere, 2040
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Pump flow | 12.42 gpm [47.0 lpm] |
| Capacity | 14.5 gal [54.9 L] |
| Pressure | 2466 psi [170.0 bar] |
Three-Point Hitch of John Deere, 2040
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift | 6768 lbs [3069 kg] |
Electrical System of John Deere, 2040
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 55 |
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 55 |
Frequently asked questions
How much horsepower does the John Deere 2040 have?
The John Deere 2040 delivers 70 HP.
What years was the John Deere 2040 produced?
The John Deere 2040 was produced in 1979-1987.
What engine does the John Deere 2040 have?
The John Deere 2040 is powered by a Diesel, 4-cylinder engine.
What transmission does the John Deere 2040 use?
The John Deere 2040 uses a Partially synchronized transmission.
Is the John Deere 2040 4WD?
The John Deere 2040 is available in 2WD/4WD.