Introduction
Production Information of John Deere, 5400
The production information of the tractor (5400) includes details about its manufacturing.
| Built in Italy |
| Utility tractor |
| Distributor | John Deere |
|---|---|
| Manufacturer | Carraro |
Dimension and Tires Information of John Deere, 5400
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 82.7 inches [210 cm] |
|---|---|
| Weight | 5750 lbs [2608 kg] |
| Length | 132 inches [335 cm] |
| Height (cab) | 94.5 inches [240 cm] |
| 2WD Standard tires (ag) | Front: 7.50-16. Rear: 16.9R30 |
|---|---|
| 4WD Standard tires (ag) | Front: 11.2R24. Rear: 16.9R30 |
Engine Specifications of John Deere, 5400
Get the specifications for the engine and if different options are available.
| John Deere 3029TAT01 |
| Liquid-cooled |
| Turbocharged |
| 3-cylinder |
| Starter volts | 12 |
|---|---|
| Starter | Electric |
| Compression | 17.8:1 |
| Starter power | 3.4 hp [2.5 kW] |
| Idle RPM | 800-2600 |
| Operating RPM | 1600-2400 |
| Rated RPM | 2400 |
| Displacement | 179 ci [2.9 L] |
| Rated Power (net) | 70 hp [52.2 kW] |
| Bore/Stroke | 4.19x4.33 inches [106 x 110 mm] |
| Firing order | 1-2-3 |
| Oil capacity | 9 qts [8.5 L] |
| Torque RPM | 1600 |
| Torque | 182.9 lb-ft [248.0 Nm] |
Transmission Information of John Deere, 5400Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in three ranges (A, B, C) with reverse lever. Gear shifts are synchronized, using the clutch. Tractor must be stopped, and clutch used, to shift range or direction. |
| Type | Partially synchronized |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 2
| Four gears (1-4) in three ranges (A, B, C) with reverse lever and Hi-Lo shift. Gear shifts are synchronized, using the clutch. Tractor must be stopped, and clutch used, to shift range, direction, or Hi-Lo. |
| Type | Partially synchronized |
|---|---|
| Gears | 24 forward and reverse |
| 12-speed partially synchronized |
| 24-speed partially synchronized |
Mechanical Specs of John Deere, 5400Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Wet disc brakes |
| Cab standard. |
| Trailer brakes | Hydraulic OptOptional |
|---|---|
| Differential lock | Mechanical rear |
| Steering | Hydrostatic power |
Power Information of John Deere, 5400Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 540/540E |
|---|---|
| 540/1000 |
Hydraulics Specifications of John Deere, 5400
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 11.4 gpm [43.1 lpm] |
| Steering flow | 7 gpm [26.5 lpm] |
Three-Point Hitch of John Deere, 5400
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Control | Position and draft control |
| Rear lift | 5291 lbs [2399 kg] |
Electrical System of John Deere, 5400
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Cab Charging amps | 60 |
| Charging system | Alternator |
| Battery AH | 100 |
| ROPS Charging amps | 40 |
Frequently asked questions
How much horsepower does the John Deere 5400 have?
The John Deere 5400 delivers 70 HP.
What years was the John Deere 5400 produced?
The John Deere 5400 was produced in 1996-2000.
What engine does the John Deere 5400 have?
The John Deere 5400 is powered by a 3-cylinder engine.
What transmission does the John Deere 5400 use?
The John Deere 5400 uses a Partially synchronized transmission.
How much does the John Deere 5400 weigh?
The John Deere 5400 weighs 5750 lbs [2608 kg].
Is the John Deere 5400 4WD?
The John Deere 5400 is available in 2WD/4WD.