Introduction
Production Information of John Deere, 2450
The production information of the tractor (2450) includes details about its manufacturing.
| Utility tractor |
| Built in Mannheim, Baden-Württemberg, Germany |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 2450
This section sums up the dimension and tires information of the tractor.
| 2WD Front tread | 53.5 to 79.1 inches [135 to 200 cm] |
|---|---|
| 2WD Wheelbase | 89.2 inches [226 cm] |
| 4WD Clearance (front axle) | 19.5 inches [49 cm] |
| Width | 73.3 inches [186 cm] |
| 4WD Wheelbase | 90 inches [228 cm] |
| 4WD Front tread | 59.1 to 79.1 inches [150 to 200 cm] |
| 2WD Clearance (front axle) | 26.3 inches [66 cm] |
| Length | 165.1 inches [419 cm] |
| Rear tread | 59.1 to 78.7 inches [150 to 199 cm] |
| 2WD Standard tires (ag) | Front: 7.50-18. Rear: 13.6-38 |
|---|---|
| 4WD Standard tires (ag) | Front: 11.2-28. Rear: 13.6-38 |
Engine Specifications of John Deere, 2450
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Power | 70 hp [52.2 kW] |
|---|---|
| Displacement | 239.2 ci [3.9 L] |
| Rated RPM | 2300 |
| Bore/Stroke | 4.19x4.33 inches [106 x 110 mm] |
| Starter power | 4 hp [3.0 kW] |
| Starter volts | 12 |
Transmission Information of John Deere, 2450Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Syncro-Range |
|---|---|
| Clutch | Mechanical disc |
| Type | Partially synchronized |
| Gears | 8 forward and 4 reverse |
Transmission variants 2
| Transmission | Hi-Lo |
|---|---|
| Clutch | Hydraulic |
| Type | Two-speed power shift |
| Gears | 16 forward and 8 reverse |
| 8-speed partially synchronized |
| 16-speed two-speed power shift |
Mechanical Specs of John Deere, 2450Y
This section summarizes all mechanical information such as the brake system and other specifications.
| ROPS. MC1 or Sound-Gard cab optional. CC2 cab available in 1991. |
| Two- or four-wheel drive |
| Hydraulic wet disc brakes |
| Hydrostatic *With four-wheel drive and SG2 cab option. | |
| Steering | Power assist |
| Final drives | Planetary |
| Differential lock | Mechanical rear |
Power Information of John Deere, 2450Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Engine RPM | 540@2075 |
| 1000 | |
| Clutch | Hydraulic wet disc |
| Rear PTO Type | 540 |
Hydraulics Specifications of John Deere, 2450
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed-center constant pressure |
|---|---|
| Pressure | 2756 psi [190.0 bar] |
| Pump flow | 11.6 gpm [43.9 lpm] |
Three-Point Hitch of John Deere, 2450
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and draft control |
| Rear lift (at ends) | 6768 lbs [3069 kg] |
Electrical System of John Deere, 2450
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 55 |
| Battery volts | 12 |
| Charging amps | 55 |
| Batteries | 2 |
Frequently asked questions
How much horsepower does the John Deere 2450 have?
The John Deere 2450 delivers 70 HP.
What years was the John Deere 2450 produced?
The John Deere 2450 was produced in 1987-1994.
What engine does the John Deere 2450 have?
The John Deere 2450 is powered by a Diesel, 4-cylinder engine.
What transmission does the John Deere 2450 use?
The John Deere 2450 uses a Syncro-Range transmission.
Is the John Deere 2450 4WD?
The John Deere 2450 is available in 2WD/4WD.