Introduction
John Deere 5225 Utility Tractor
The John Deere 5225 is a utility tractor produced between 2005 and 2008 in Augusta, Georgia, USA. Designed for versatility in various agricultural environments, this model offers a range of transmission and configuration options to suit different operational requirements.
Engine and Performance
The tractor is powered by a 3.1-liter, 5-cylinder liquid-cooled engine. It generates a gross power output of 56 hp (41.8 kW) at a rated speed of 2400 RPM. The engine features a 20.5:1 compression ratio and utilizes a paper and felt element air cleaner system to maintain efficiency.
Transmission Options
The 5225 offers three distinct transmission configurations. The SyncShuttle provides 9 forward and 3 reverse gears with partially synchronized shifting. The PowrReverser transmission features 12 forward and reverse gears with power shuttle capability, allowing for direction changes without using the clutch. An optional PowrReverser Hi/Lo configuration adds a two-speed power shift, resulting in 24 forward and reverse gears.
Hydraulics and Hitch
Equipped with an open-center hydraulic system, the tractor delivers a pump flow of 13.5 gpm (51.1 lpm) at a pressure of 2828 psi. It supports up to three rear valves and optional mid-valves. The rear hitch is a Category II/I type, featuring top-link draft sensing and a lift capacity of 3374 lbs (1530 kg) measured at 24 inches behind the lift point.
Mechanical and Operator Station
The tractor is available in both two-wheel and four-wheel drive configurations. It features power steering and differential hydraulic wet disc brakes for enhanced maneuverability and stopping power. Operator comfort is provided through an open station with a two-post folding ROPS or an optional factory-installed cab with air conditioning.
Conclusion
The John Deere 5225 is a robust utility tractor suited for general agricultural tasks, offering sufficient power and hydraulic capacity for standard implements. Its diverse transmission options and availability in both 2WD and 4WD make it a versatile choice for farmers seeking a reliable machine for daily operations.
Production Information of John Deere, 5225
- Utility tractor
- Built in Augusta, Georgia, USA
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 5225
| Flange rear axle | 57.3 inch length [1455 mm] |
|---|---|
| Wheelbase | 85.7 inches [217 cm] |
| 4WD Clearance (front axle) | 15.8 inches [40 cm] |
| 2WD Clearance (front axle) | 18 inches [45 cm] |
| 2WD Length | 136.9 inches [347 cm] |
| Clearance (drawbar) | 15 inches [38 cm] |
| 4WD Length | 141.6 inches [359 cm] |
| 2WD Standard tires (ag) | Front: 6.50-16. Rear: 13.6-28 |
|---|---|
| 4WD Standard tires (ag) | Front: 8.3-24. Rear: 13.6-28 |
Engine Specifications of John Deere, 5225
- Liquid-cooled
- 5-cylinder
| Coolant capacity | 10 qts [9.5 L] |
|---|---|
| Power (gross) | 56 hp [41.8 kW] |
| Air cleaner | Paper and felt elements |
| Rated RPM | 2400 |
| Compression | 20.5:1 |
| Displacement | 186.1 ci [3.1 L] |
| Oil capacity | 11 qts [10.4 L] |
| Emissions | Tier II |
| Bore/Stroke | 3.385x4.134 inches [86 x 105 mm] |
| Starter volts | 12 |
| Operating RPM | 1600-2400 |
| Idle RPM | 900-2625 |
Transmission Information of John Deere, 5225
Transmission variants 1
- Three gears (1-3) plus reverse in three ranges (A-C). Gears may be shifted on the move using the clutch. Tractor must be stopped, and clutch used, to shift ranges.
| 122o↔-10oF [50o↔-23oC] | : Hy-Gard |
|---|---|
| Transmission | John Deere SyncShuttle |
| Oil capacity | 41.2 qts [39.0 L] |
| Clutch | Dry disc |
| Type | Partially synchronized |
| 86o↔-40oF [30o↔-40oC] | : Low-Viscosity Hy-Gard |
| Oil type | 122o↔-10oF [50o↔-23oC] : Hy-Gard 86o↔-40oF [30o↔-40oC] : Low-Viscosity Hy-Gard |
| Gears | 9 forward and 3 reverse |
Transmission variants 2
- Four gears (1-4) in three ranges (A-C) with reverser lever. Direction may be changed without using the clutch. Gear shifts are synchronized using the clutch. Tractor must be stopped to shift ranges.
| 122o↔-10oF [50o↔-23oC] | : Hy-Gard |
|---|---|
| Transmission | John Deere PowrReverser |
| Oil capacity | 46 qts [43.5 L] |
| Clutch | Wet disc |
| Type | Power shuttle |
| 86o↔-40oF [30o↔-40oC] | : Low-Viscosity Hy-Gard |
| Oil type | 122o↔-10oF [50o↔-23oC] : Hy-Gard 86o↔-40oF [30o↔-40oC] : Low-Viscosity Hy-Gard |
| Gears | 12 forward and reverse |
Transmission variants 3
- Adds a push-button high-low power shift to the PowrReverser transmission. Gear shifts are synchronized using the clutch. Tractor must be stopped to shift ranges.
| Transmission | John Deere PowrReverser Hi/Lo |
|---|---|
| Clutch | Wet disc |
| Type | Two-speed power shift |
| Gears | 24 forward and reverse |
- 9-speed partially synchronized
- 12-speed power shuttle
- 24-speed two-speed power shift
Mechanical Specs of John Deere, 5225
- Two- or four-wheel drive
- Differential hydraulic wet disc brakes
- Power steering
- Open operator station with two-post folding ROPS. Optional isolated flat-platform (IOOS). Cab available with air-conditioning.
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of John Deere, 5225
| Engine RPM | 540@2400 |
|---|---|
| Rear PTO | Independent |
| Rear PTO(optional) | 540/540E |
| Rear PTO Type | 540 |
| Clutch | Dry disc |
| Clutch(optional) | 540E@1700 |
| Clutch(optional) | 540/1000 |
| Clutch(optional) | Electro-hydraulic wet disc (24-speed) |
Optional field conversion kit.
Hydraulics Specifications of John Deere, 5225
| Pump flow | 13.5 gpm [51.1 lpm] |
|---|---|
| Type | Open center |
| Rear valves | 1 to 3 |
| Pressure | 2828 psi [195.0 bar] |
| Capacity | 10.3 gal (9-speed) [39.0 L] |
| Total flow | 19.4 gpm [73.4 lpm] |
| Mid valves | 0, 2 or 3 |
| Mid valves(optional) | 11.5 gal (12-speed) [43.5 L] |
| Steering press. | 1957 psi [134.9 bar] |
| Steering flow | 5.9 gpm [22.3 lpm] |
Three-Point Hitch of John Deere, 5225
| Rear Type | II/I |
|---|---|
| Control | Top-link draft sensing |
| Rear lift (at 24"/610mm) | 3374 lbs [1530 kg] |
Electrical System of John Deere, 5225
| Battery Group | BCI 31 |
|---|---|
| Ground | Negative |
| Battery CCA | 950 |
| Cab Charging amps | 90 |
| Charging system | Alternator |
| Battery volts | 12 |
| ROPS Charging amps | 70 |
Where it sits
With 56 HP, the John Deere 5225 sits just below 5065M (65 HP) in John Deere's range. Its power puts it in the 37th percentile of 2000s models in our database (2822 machines).
Frequently asked questions
How much horsepower does the John Deere 5225 have?
The John Deere 5225 delivers 56 HP.
What years was the John Deere 5225 produced?
The John Deere 5225 was produced in 2005-2008.
What engine does the John Deere 5225 have?
The John Deere 5225 is powered by a 5-cylinder engine.
What transmission does the John Deere 5225 use?
The John Deere 5225 uses a John Deere SyncShuttle transmission.
Is the John Deere 5225 4WD?
The John Deere 5225 is available in 2WD/4WD.