John Deere 9560R tractor

John Deere 9560R

Power

560 hp

Production

2012-2014

Engine

Turbocharged diesel, 6-cylinder 24-valve

Transmission

John Deere PowerShift

Drive

4WD

From the same series:

9510R

Introduction

Production Information of John Deere, 9560R

The production information of the tractor (9560R) includes details about its manufacturing.

Original price was $406,839 in 2014
Four-wheel Drive (4WD) tractor
Built in Waterloo, Iowa, USA
ManufacturerJohn Deere

Dimension and Tires Information of John Deere, 9560R

This section sums up the dimension and tires information of the tractor.

Wheelbase137.8 inches [350 cm]
Front axle4.72 by 120 inches [119 by 3048 mm]
Width120 inches [304 cm]
Length282 inches [716 cm]
Rear axle4.72 by 120 inches [119 by 3048 mm]
With hitch Length295 inches [749 cm]
Ag front800/70R38
Ag rear800/70R38

Engine Specifications of John Deere, 9560R

Get the specifications for the engine and if different options are available.

John Deere PowerTech PSX
Liquid-cooled inline
6-cylinder 24-valve
Turbocharged diesel
Emission controlExhaust gas recirculation (EGR)
Fuel systemElectronic unit injectors
Displacement826.7 ci [13.5 L]
Bore/Stroke5.197x6.496 inches [132 x 165 mm]
EmissionsTier 4A
Maximum Power (gross)616 hp [459.4 kW]
Rated Power (gross)560 hp [417.6 kW]
Starter volts12
Rated RPM2100
Compression16:1

Transmission Information of John Deere, 9560RY

Discover all variants of transmission available for this tractor model.

Transmission variants 1

TransmissionJohn Deere PowerShift
ClutchHydraulic wet disc
TypeFull power shift
Gears18 forward and 6 reverse

Mechanical Specs of John Deere, 9560RY

This section summarizes all mechanical information such as the brake system and other specifications.

CommandView II cab standard with air-conditioning.
Four-wheel drive
Hydraulic wet disc brakes
SteeringHydraulic power
Final drivesInboard planetary with double-reduction axle
Trailer brakesHydraulic OptOptional
Differential lockFully-locking electro-hydraulic

Power Information of John Deere, 9560RY

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent (optional)
Rear PTO Type1000 (1.75)

Hydraulics Specifications of John Deere, 9560R

Hydraulic system type, pressure, pump flow and valves.

45 gpm (19.1mm SCV) [170.3 lpm]
TypeClosed center pressure flow compensated
78 gpm (High-Flow) [295.2 lpm]
Pump flow48 gpm [181.7 lpm]
Pressure2900 psi [200.0 bar]
SCV flow37 gpm [140.0 lpm]
Valves4 to 6

Three-Point Hitch of John Deere, 9560R

Hitch category and rear/front lift capacity.

Rear Type4N/4
DrawbarCategory 5 standard heavy-duty support and 5,440 kg load rating. (12,000 pound)
20,000 lbs (optional) [9072 kg]
ControlElectronic draft sensing
Rear lift15,300 lbs [6940 kg]

Electrical System of John Deere, 9560R

Battery voltage, charging system and ground.

Battery volts12
GroundNegative
Batteries3
Charging volts12
Charging systemAlternator
Battery CCA925
Charging amps200

Frequently asked questions

How much horsepower does the John Deere 9560R have?

The John Deere 9560R delivers 560 HP.

What years was the John Deere 9560R produced?

The John Deere 9560R was produced in 2012-2014.

What engine does the John Deere 9560R have?

The John Deere 9560R is powered by a Turbocharged diesel, 6-cylinder 24-valve engine.

What transmission does the John Deere 9560R use?

The John Deere 9560R uses a John Deere PowerShift transmission.

Is the John Deere 9560R 4WD?

The John Deere 9560R is available in 4WD.

Compare the John Deere 9560R with another model