Minneapolis-Moline GTC
Power
unknown hp
Production
1951-1953
Engine
LP gas, 4-cylinder
Transmission
Gear
Drive
2WD
Introduction
Minneapolis-Moline GTC: Standard-Tread Tractor (1951-1953)
The Minneapolis-Moline GTC is a standard-tread tractor manufactured between 1951 and 1953 in Minneapolis, Minnesota, USA. Designed for general agricultural tasks, this two-wheel-drive machine represents the post-war era of American tractor production, focusing on mechanical simplicity and operational reliability.
Engine and Performance
The GTC is powered by a Minneapolis-Moline 340-4 liquid-cooled, four-cylinder engine. With a displacement of 340.5 cubic inches (5.6 liters) and a bore/stroke ratio of 4.25x6.00 inches, the engine is designed to operate at a rated speed of 1100 RPM. This model utilizes LP gas as its primary fuel source.
Transmission and Drivetrain
The tractor is equipped with a mechanical transmission providing five forward gears and one reverse gear. Power is transferred via a dry disc clutch. The machine features two-wheel drive, and steering is accomplished through a manual system.
Dimensions and Hydraulics
The GTC features a wheelbase of 82.5 inches (209 cm) with an overall length of 133.3 inches (338 cm) and a height of 71 inches (180 cm). The tread width is set at 53.25 inches (135 cm) for the front and 62 inches (157 cm) for the rear. It is equipped with 7.50-18 front agricultural tires and 14-34 rear agricultural tires. A rear PTO operating at 540 RPM is standard for powering implements.
Conclusion
The Minneapolis-Moline GTC is a straightforward, open-station tractor intended for standard field operations. Its mechanical configuration and reliance on manual controls make it a representative example of mid-20th-century agricultural machinery, suitable for collection or light-duty farm maintenance.
Production Information of Minneapolis-Moline, GTC
- Standard-tread tractor
- Built in Minneapolis, Minnesota, USA
| Manufacturer | Minneapolis-Moline |
|---|
Dimension and Tires Information of Minneapolis-Moline, GTC
| Wheelbase | 82.5 inches [209 cm] |
|---|---|
| Rear tread | 62 inches [157 cm] |
| Front tread | 53.25 inches [135 cm] |
| Length | 133.3 inches [338 cm] |
| Height | 71 inches [180 cm] |
| Ag front | 7.50-18 |
|---|---|
| Ag rear | 14-34 |
Engine Specifications of Minneapolis-Moline, GTC
- Minneapolis-Moline 340-4
- Liquid-cooled
- LP gas
- 4-cylinder
| Rated RPM | 1100 |
|---|---|
| Displacement | 340.5 ci [5.6 L] |
| Starter volts | 6 |
| Bore/Stroke | 4.25x6.00 inches [108 x 152 mm] |
Transmission Information of Minneapolis-Moline, GTC
Transmission variants 1
| Type | Gear |
|---|---|
| Gears | 5 forward and 1 reverse |
| Clutch | Dry disc |
Mechanical Specs of Minneapolis-Moline, GTC
- Two-wheel drive
- Open operator station.
| Steering | Manual |
|---|
Power Information of Minneapolis-Moline, GTC
| Rear PTO Type | 540 |
|---|
Frequently asked questions
How much horsepower does the Minneapolis-Moline GTC have?
The Minneapolis-Moline GTC delivers unknown HP.
What years was the Minneapolis-Moline GTC produced?
The Minneapolis-Moline GTC was produced in 1951-1953.
What engine does the Minneapolis-Moline GTC have?
The Minneapolis-Moline GTC is powered by a LP gas, 4-cylinder engine.
What transmission does the Minneapolis-Moline GTC use?
The Minneapolis-Moline GTC uses a Gear transmission.
Is the Minneapolis-Moline GTC 4WD?
The Minneapolis-Moline GTC is available in 2WD.