New Holland 8360
Power
127 hp[P] hp
Production
1996-1999
Engine
6-cylinder
Transmission
Dual Command
Drive
2WD/4WD
From the same series:
Introduction
New Holland 8360 Row-Crop Tractor
The New Holland 8360 is a row-crop tractor manufactured in England between 1996 and 1999. Designed for versatile agricultural operations, it provides a power output of 127 hp and was engineered to serve as a reliable platform for various field tasks.
Engine and Performance
The tractor is powered by a 7.5-liter, 6-cylinder liquid-cooled engine. It operates at a rated speed of 2200 RPM and features a compression ratio of 17.5:1. The engine setup includes a 12-volt starting system with a 4.9 hp starter, and it is maintained by a 20.8-quart oil capacity and a cooling system capacity of up to 27.5 quarts in cab-equipped models.
Transmission and Drivetrain
The 8360 offers three distinct transmission configurations: the 23-speed Dual Command and the partial power shift Range Command (available in 17-speed for 2WD or 18-speed for 4WD models). These transmissions utilize wet disc clutches and allow for on-the-move gear shifting. The tractor is available in both two-wheel and four-wheel drive variants, supported by hydrostatic power steering and differential hydraulic wet disc brakes.
Hydraulics and Hitch
The hydraulic system is a closed-center load-sensing type, providing a pump flow of 26 gpm at a system pressure of 2755 psi. It features between two and four valves for implement control. The rear hitch is a Category II/III type, capable of a lift capacity of 12,000 lbs measured at 24 inches behind the hitch point.
Dimensions and PTO
The tractor features an independent rear PTO with 540/1000 RPM capability. The 4WD model has a wheelbase of 107.2 inches, while the 2WD model measures 108.3 inches. Front and rear tread widths are adjustable to accommodate various row-crop spacings, and the machine provides a drawbar clearance of 15 inches.
Conclusion
The New Holland 8360 is a robust, mid-range row-crop tractor suitable for farmers requiring a balance of mechanical simplicity and operational flexibility. Its multiple transmission options and significant hydraulic lift capacity make it well-suited for diverse field applications and implement handling.
Production Information of New Holland, 8360
- Row-Crop tractor
- Built in England
| Manufacturer | New Holland |
|---|---|
| Original price | $56,000 (1999) |
Dimension and Tires Information of New Holland, 8360
| Rear tread | 60.2 to 87.9 inches [152 to 223 cm (manual)] |
|---|---|
| Wheelbase | 108.3 inches (2WD) [275 cm] |
| Width | 84 inches (min) [213 cm] |
| Width(optional) | 182 inches (4WD) [462 cm] |
| Width(optional) | 107.2 inches (4WD) [272 cm] |
| Clearance (drawbar) | 15 inches [38 cm] |
| Clearance (front axle) | 23.1 inches (2WD) [58 cm] |
| Length | 180 inches (2WD) [457 cm] |
| Rear tread | 60.2 to 120 inches [152 to 304 cm (duals)] |
| Rear tread | 59.8 to 90.6 inches [151 to 230 cm (power)] |
| Front tread | 60.0 to 88.0 inches [152 to 223 cm (4WD)] |
| Front tread | 60.7 to 86.1 inches [154 to 218 cm (2WD)] |
| Front tread(optional) | 20 inches (4WD) [50 cm] |
| Standard tires (ag) | Front: 11.00-16. Rear: 18.4R38 (2WD) |
|---|---|
| Standard tires (ag)(optional) | Front: 14.9R28. Rear: 18.4R38 (4WD) |
Engine Specifications of New Holland, 8360
- Liquid-cooled
- 6-cylinder
| Coolant capacity | 25.4 qts (ROPS) [24.0 L] |
|---|---|
| Rated RPM | 2200 |
| Intake valve clearance | 0.016 inches (cold) [0.406 mm] |
| Operating RPM | 1500-2200 |
| Torque RPM | 1400 |
| Idle RPM | 700-2420 |
| Displacement | 456 ci [7.5 L] |
| Compression | 17.5:1 |
| Oil capacity | 20.8 qts [19.7 L] |
| Bore/Stroke | 4.5x5.0 inches [114 x 127 mm] |
| Starter power | 4.9 hp [3.7 kW] |
| Exhaust valve clearance | 0.018 inches (cold) [0.457 mm] |
| Starter volts | 12 |
| Firing order | 1-5-3-6-2-4 |
Transmission Information of New Holland, 8360
Transmission variants 1
- Four gears (1-4) in three ranges (A-C) with left-hand shuttle lever and push-button underdrive. Gear shifts may be made on the move with the clutch. The tractor must be stopped to shift range. The forward-reverse shuttle, and the push-button underdrive, may be performed on the move without the clutch. Reverse gears operate in underdrive only. Optional creeper doubles the available speeds to 46 forward and 24 reverse.
| Transmission | Dual Command |
|---|---|
| Oil capacity | 76.8 qts [72.7 L] |
| Clutch | Wet disc |
| Type | Partially synchronized |
| Gears | 23 forward and 12 reverse |
Transmission variants 2
- The 17-speed Range Command transmission was available with 2WD. Six gears (1-6) in three ranges (A-C) with left-hand shuttle lever. Push-button gear shifting on the move. To shift ranges, hold up or down gear shift button while pressing range shift button. Reverse is available in range B only. Optional creeper increases available speeds to 30 forward and 12 in reverse.
| Transmission | Range Command |
|---|---|
| Oil capacity | 94.8 qts [89.7 L] |
| Clutch | Wet disc |
| Type | Partial power shift |
| Gears | 17 forward and 6 reverse |
Transmission variants 3
- The 18-speed Range Command transmission was available with 4WD. Six gears (1-6) in three ranges (A-C) with left-hand shuttle lever. Push-button gear shifting on the move. To shift ranges, hold up or down gear shift button while pressing range shift button. Reverse is available in range B only. Optional creeper increases available speeds to 31 and 12.
| Transmission | Range Command |
|---|---|
| Oil capacity | 94.8 qts [89.7 L] |
| Clutch | Wet disc |
| Type | Partial power shift |
| Gears | 18 forward and 6 reverse |
- 23-speed partially synchronized
- 17-speed partial power shift
- 18-speed partial power shift
Mechanical Specs of New Holland, 8360
- Two- or four-wheel drive
- Two-post ROPS. Optional cab.
- Differential hydraulic wet disc brakes
| Differential lock | Rear or front and rear (4WD) with push-button operation. Manual and automatic modes. (2WD) |
|---|---|
| Steering | Hydrostatic power |
Power Information of New Holland, 8360
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of New Holland, 8360
| Steering flow | 16.4 gpm [62.1 lpm] |
|---|---|
| Type | Closed center load sensing |
| Valves | 2 to 4 |
| Pressure | 2755 psi [190.0 bar] |
| Capacity | 23.7 gal (18-speed) [89.7 L] |
| Steering press. | 2465 psi [170.0 bar] |
| Pump flow | 26 gpm [98.4 lpm] |
| Pump flow(optional) | 19.2 gal (23-speed) [72.7 L] |
Three-Point Hitch of New Holland, 8360
| Rear Type | II/III |
|---|---|
| Rear lift (at 24"/610mm) | 12,000 lbs [5443 kg] |
Electrical System of New Holland, 8360
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Batteries | 2 |
| Batteries(optional) | 100 (with cab) |
| Charging system | Alternator |
| Battery CCA | 900 |
| Charging amps | 70 |
Where it sits
With 127 hp[P] HP, the New Holland 8360 sits between 8260 (111 HP) and 8560 (144 HP) in New Holland's range. Its power puts it in the 80th percentile of 1990s models in our database (2097 machines).
Frequently asked questions
How much horsepower does the New Holland 8360 have?
The New Holland 8360 delivers 127 hp[P] HP.
What years was the New Holland 8360 produced?
The New Holland 8360 was produced in 1996-1999.
What engine does the New Holland 8360 have?
The New Holland 8360 is powered by a 6-cylinder engine.
What transmission does the New Holland 8360 use?
The New Holland 8360 uses a Dual Command transmission.
Is the New Holland 8360 4WD?
The New Holland 8360 is available in 2WD/4WD.