Shibaura SE2540
Power
25 hp
Production
unknown
Engine
Diesel, 2-cylinder
Transmission
Gear
Weight
5732 lbs [2600 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Shibaura, SE2540
The production information of the tractor (SE2540) includes details about its manufacturing.
| Compact Utility tractor |
| Manufacturer | Shibaura |
|---|
Dimension and Tires Information of Shibaura, SE2540
This section sums up the dimension and tires information of the tractor.
| Max weight | 5732 lbs [2600 kg] |
|---|---|
| Wheelbase | 60.2 inches [152 cm] |
| Height (hood) | 47.2 inches [119 cm] |
| Height (steering wheel) | 55.7 inches [141 cm] |
| Length | 111.2 inches [282 cm] |
| Ground clearance | 12.6 inches [32 cm] |
| Weight | 2326 lbs [1055 kg] |
| Width | 59.3 inches [150 cm] |
| Rear tread | 43.3 to 56.7 inches [109 to 144 cm] |
| Front tread | 44.5 inches [113 cm] |
| Ag front | 6.00-16 |
|---|---|
| Ag rear | 11.2-24 |
Engine Specifications of Shibaura, SE2540
Get the specifications for the engine and if different options are available.
| Shibaura LET 892 |
| Liquid-cooled |
| 2-cylinder |
| Diesel |
| Coolant capacity | 5.6 qts [5.3 L] |
|---|---|
| Oil capacity | 5.3 qts [5.0 L] |
| Air cleaner | Oil bath |
| Operating RPM | 1250-2500 |
| Rated RPM | 2500 |
| Displacement | 77.62 ci [1.3 L] |
| Power | 25 hp [18.6 kW] |
| Compression | 21:1 |
| Bore/Stroke | 3.54x3.94 inches [90 x 100 mm] |
| Starter volts | 12 |
| Torque RPM | 2000 |
| Torque | 55.3 lb-ft [75.0 Nm] |
Transmission Information of Shibaura, SE2540Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears, plus reverse, in four ranges. |
| Type | Gear |
|---|---|
| Oil capacity | 23.25 qts [22.0 L] |
| Gears | 12 forward and 4 reverse |
| Clutch | 316mm dry disc |
Mechanical Specs of Shibaura, SE2540Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Open operator station. Two-post ROPS available. |
| Mechanical drum brakes |
| Manual steering |
| Final drives | Spur gear |
|---|
Power Information of Shibaura, SE2540Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| 856@2500 | |
| 674@2500 | |
| Rear PTO Type | 540 (1.375) |
| 1330@2500 | |
| Engine RPM | 525@2500 |
Hydraulics Specifications of Shibaura, SE2540
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 5.3 gpm [20.1 lpm] |
| Valves | 1 |
| Capacity | 5.8 gal [22.0 L] |
| Pressure | 2133 psi [147.1 bar] |
Three-Point Hitch of Shibaura, SE2540
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at ends) | 2425 lbs [1099 kg] |
Electrical System of Shibaura, SE2540
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the Shibaura SE2540 have?
The Shibaura SE2540 delivers 25 HP.
What years was the Shibaura SE2540 produced?
The Shibaura SE2540 was produced in unknown.
What engine does the Shibaura SE2540 have?
The Shibaura SE2540 is powered by a Diesel, 2-cylinder engine.
What transmission does the Shibaura SE2540 use?
The Shibaura SE2540 uses a Gear transmission.
How much does the Shibaura SE2540 weigh?
The Shibaura SE2540 weighs 5732 lbs [2600 kg].
Is the Shibaura SE2540 4WD?
The Shibaura SE2540 is available in 4WD.