
Steiger Cougar II ST-300
Power
300 hp
Production
1974-1976
Engine
Turbocharged diesel, 6-cylinder
Transmission
Dana-Spicer ST-1010
Weight
22000 lbs [9979 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Steiger, Cougar II ST-300
The production information of the tractor (Cougar II ST-300) includes details about its manufacturing.
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | Steiger |
|---|
Dimension and Tires Information of Steiger, Cougar II ST-300
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 121.5 inches [308 cm] |
|---|---|
| Weight | 22000 lbs [9979 kg] |
| Height (cab) | 133.25 inches [338 cm] |
| Length | 244 inches [619 cm] |
| Width | 96 inches*Width with 23.1-30 tires. [243 cm] |
| Ag front | 23.1-30 |
|---|---|
| Ag rear | 23.1-30 |
Engine Specifications of Steiger, Cougar II ST-300
Get the specifications for the engine and if different options are available.
| Caterpillar 3006T |
| Liquid-cooled horizontal-shaft inline |
| Turbocharged diesel |
| 6-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 638 ci [10.5 L] |
| Rated RPM | 2200 |
| Bore/Stroke | 4.75x6.00 inches [121 x 152 mm] |
| Coolant capacity | 60 qts [56.8 L] |
| Torque RPM | 1550 |
| Torque | 681 lb-ft [923.4 Nm] |
| Power | 300 hp [223.7 kW] |
Transmission Information of Steiger, Cougar II ST-300Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Dana-Spicer ST-1010 |
|---|---|
| Gears | 10 forward and 2 reverse |
Mechanical Specs of Steiger, Cougar II ST-300Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with optional heat and air-conditioning. |
| Hydraulic disc brakes |
| Articulated power steering |
| Final drives | Outboard planetary |
|---|
Power Information of Steiger, Cougar II ST-300Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Engine | 300 hp [223.7 kW] |
|---|---|
| Drawbar (claimed) | 227 hp [169.3 kW] |
Hydraulics Specifications of Steiger, Cougar II ST-300
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 18 gpm [68.1 lpm] |
| Valves | 3 |
| Pump flow | 25 gpm [94.6 lpm] |
Three-Point Hitch of Steiger, Cougar II ST-300
Hitch category and rear/front lift capacity.
| Rear Type | III OptOptional |
|---|
Electrical System of Steiger, Cougar II ST-300
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Charging amps | 62 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Steiger Cougar II ST-300 have?
The Steiger Cougar II ST-300 delivers 300 HP.
What years was the Steiger Cougar II ST-300 produced?
The Steiger Cougar II ST-300 was produced in 1974-1976.
What engine does the Steiger Cougar II ST-300 have?
The Steiger Cougar II ST-300 is powered by a Turbocharged diesel, 6-cylinder engine.
What transmission does the Steiger Cougar II ST-300 use?
The Steiger Cougar II ST-300 uses a Dana-Spicer ST-1010 transmission.
How much does the Steiger Cougar II ST-300 weigh?
The Steiger Cougar II ST-300 weighs 22000 lbs [9979 kg].
Is the Steiger Cougar II ST-300 4WD?
The Steiger Cougar II ST-300 is available in 4WD.