Steiger Panther III PTA-310
Power
310 hp
Production
1980-1982
Engine
Turbocharged aftercooled diesel, 6-cylinder
Transmission
Allison HT-754
Weight
28400 lbs [12882 kg]
Drive
4WD
Introduction
Production Information of Steiger, Panther III PTA-310
The production information of the tractor (Panther III PTA-310) includes details about its manufacturing.
| A Steiger Panther III PTA-310 was the "Pink Panther", a custom-ordered pink Panther III. Steiger used the "Pink Panther" in advertising. |
| Original price was $100,500 in 1982 |
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | Steiger |
|---|
Dimension and Tires Information of Steiger, Panther III PTA-310
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 132.5 inches [336 cm] |
|---|---|
| Shipping weight | 28400 lbs [12882 kg] |
| 95.7 inches*Fenders [243 cm] | |
| Length | 264.5 inches [671 cm] |
| Max weight | 34000 lbs [15422 kg] |
| Width | 52 inches*Frame [132 cm] |
| Ag front | 23.1-34 |
|---|---|
| 23.1-30 | |
| 20.8-38 | |
| 18.4-34 | |
| 23.1-30 | |
| 24.5-32 | |
| Ag front | 18.4-30 |
| Ag rear | 18.4-30 |
| 24.5-32 | |
| 18.4-38 | |
| 20.8-38 | |
| Ag rear | 23.1-34 |
| 20.8-34 | |
| 20.8-34 | |
| 32.5-32 | |
| 32.5-32 | |
| 18.4-38 | |
| 18.4-34 |
Engine Specifications of Steiger, Panther III PTA-310
Get the specifications for the engine and if different options are available.
| Cummins NTA-855C |
| Liquid-cooled inline |
| Turbocharged aftercooled diesel |
| 6-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 855 ci [14.0 L] |
| Rated RPM | 2100 |
| Bore/Stroke | 5.50x6.00 inches [140 x 152 mm] |
| Coolant capacity | 58 qts [54.9 L] |
| Oil capacity | 35 qts [33.1 L] |
| Torque RPM | 1400 |
| Torque | 980 lb-ft [1328.9 Nm] |
| Power | 310 hp [231.2 kW] |
Transmission Information of Steiger, Panther III PTA-310Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Allison HT-754 |
|---|---|
| Type | Power shift with torque converter |
| Gears | 10 forward and 2 reverse |
Transmission variants 2
Mechanical Specs of Steiger, Panther III PTA-310Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Safari Cab standard with air-conditioning. |
| Hydraulic disc brakes |
| Articulated power steering |
| Final drives | Outboard planetary |
|---|
Power Information of Steiger, Panther III PTA-310Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of Steiger, Panther III PTA-310
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 28.6 gpm [108.3 lpm] |
| Pressure | 2250 psi [155.1 bar] |
| Valves | 3 to 5 |
Three-Point Hitch of Steiger, Panther III PTA-310
Hitch category and rear/front lift capacity.
| Rear Type | III OptOptional |
|---|
Electrical System of Steiger, Panther III PTA-310
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging amps | 90 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Steiger Panther III PTA-310 have?
The Steiger Panther III PTA-310 delivers 310 HP.
What years was the Steiger Panther III PTA-310 produced?
The Steiger Panther III PTA-310 was produced in 1980-1982.
What engine does the Steiger Panther III PTA-310 have?
The Steiger Panther III PTA-310 is powered by a Turbocharged aftercooled diesel, 6-cylinder engine.
What transmission does the Steiger Panther III PTA-310 use?
The Steiger Panther III PTA-310 uses a Allison HT-754 transmission.
How much does the Steiger Panther III PTA-310 weigh?
The Steiger Panther III PTA-310 weighs 28400 lbs [12882 kg].
Is the Steiger Panther III PTA-310 4WD?
The Steiger Panther III PTA-310 is available in 4WD.