Steiger Panther III PT-350 tractor

Steiger Panther III PT-350

Power

350 hp

Production

1977-1981

Engine

Turbocharged diesel, 8-cylinder

Transmission

Constant mesh

Weight

29668 lbs [13457 kg]

Drive

4WD

Introduction

Production Information of Steiger, Panther III PT-350

The production information of the tractor (Panther III PT-350) includes details about its manufacturing.

Original price was $95,000 in 1981
Four-wheel Drive (4WD) tractor
Built in Fargo, North Dakota, USA
ManufacturerSteiger

Dimension and Tires Information of Steiger, Panther III PT-350

This section sums up the dimension and tires information of the tractor.

Steiger S-34 rear axle
Front axleSteiger S-34
Wheelbase132.5 inches [336 cm]
Shipping weight29668 lbs [13457 kg]
Height (exhaust)155.7 inches [395 cm]
Length264.6 inches [672 cm]
Max weight34000 lbs [15422 kg]
Width120.2 inches*Minimum [305 cm]
Ag front20.8-34
20.8-38
18.4-38
24.5-32
18.4-38
Ag front23.1-30
24.5-32
Ag rear23.1-30
30.5-32
Ag rear20.8-34
23.1-34
20.8-38
18.4-34
23.1-34
18.4-34
30.5-32

Engine Specifications of Steiger, Panther III PT-350

Get the specifications for the engine and if different options are available.

Cummins VT903
Liquid-cooled V-8
Turbocharged diesel
8-cylinder
Starter volts12
Displacement903 ci [14.8 L]
Compression15.5:1
Bore/Stroke5.50x4.75 inches [140 x 121 mm]
Coolant capacity60 qts [56.8 L]
Oil capacity38 qts [36.0 L]
Idle RPM830-2960
Rated RPM2600
Power350 hp [261.0 kW]

Transmission Information of Steiger, Panther III PT-350Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Five-speed transmission with two ranges and a two-speed transfer case. Tractor must be stopped to shift ranges on transmission or transfer case.
TypeConstant mesh
37 qts*Transmission and transfer case [35.0 L]
Oil capacity16 qts*Transmission only [15.1 L]
Gears20 forward and 4 reverse
ClutchHydraulic cerametallic dry disc

Mechanical Specs of Steiger, Panther III PT-350Y

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive
Safari Cab standard with air-conditioning.
Hydraulic disc brakes
Articulated power steering
Final drivesOutboard planetary

Power Information of Steiger, Panther III PT-350Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent OptOptional
ClutchHydrostatic-drive
Rear PTO Type540/1000

Hydraulics Specifications of Steiger, Panther III PT-350

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
Pump flow20 gpm [75.7 lpm]
Valves4 or 5
Capacity22 gal [83.3 L]
Pressure2250 psi [155.1 bar]

Three-Point Hitch of Steiger, Panther III PT-350

Hitch category and rear/front lift capacity.

Rear TypeIII OptOptional

Electrical System of Steiger, Panther III PT-350

Battery voltage, charging system and ground.

Battery volts12
GroundNegative
Batteries4
Charging volts12
Charging systemAlternator
Battery CCA475
Charging amps90

Frequently asked questions

How much horsepower does the Steiger Panther III PT-350 have?

The Steiger Panther III PT-350 delivers 350 HP.

What years was the Steiger Panther III PT-350 produced?

The Steiger Panther III PT-350 was produced in 1977-1981.

What engine does the Steiger Panther III PT-350 have?

The Steiger Panther III PT-350 is powered by a Turbocharged diesel, 8-cylinder engine.

What transmission does the Steiger Panther III PT-350 use?

The Steiger Panther III PT-350 uses a Constant mesh transmission.

How much does the Steiger Panther III PT-350 weigh?

The Steiger Panther III PT-350 weighs 29668 lbs [13457 kg].

Is the Steiger Panther III PT-350 4WD?

The Steiger Panther III PT-350 is available in 4WD.

Compare the Steiger Panther III PT-350 with another model