Steiger Panther IV CM-360
Power
360 hp
Production
1983-1985
Engine
Turbocharged aftercooled diesel, 6-cylinder
Transmission
Spicer SST 1010
Weight
26903 lbs [12203 kg]
Drive
4WD
Introduction
Steiger Panther IV CM-360: Heavy-Duty Articulated Tractor
The Steiger Panther IV CM-360 is a four-wheel-drive articulated tractor manufactured between 1983 and 1985 in Fargo, North Dakota. Designed for high-output agricultural operations, this machine belongs to the heavy-duty power segment of the early 1980s.
Engine and Power
The tractor is powered by a Caterpillar 3406 liquid-cooled, turbocharged, and aftercooled diesel engine. This 6-cylinder unit features a displacement of 893 cubic inches (14.6 L) and delivers 360 horsepower at a rated 2100 RPM. With a peak torque of 1175 lb-ft at 1200 RPM, it is built to sustain high-draft loads in demanding field conditions.
Transmission and Drivetrain
Power is transmitted through a Spicer SST 1010 constant mesh transmission paired with a two-speed transfer case. This configuration provides 20 forward gears and 4 reverse gears, allowing for precise speed matching for various tillage and heavy traction tasks. The tractor utilizes a four-wheel-drive system with articulated power steering for improved maneuverability.
Hydraulics and Hitch
The hydraulic system is an open-center design operating at a pressure of 2250 psi. It features a pump flow rate of 31 gpm (117.3 lpm) and includes 3 to 5 valves to support a wide range of external implements. The rear hitch is compatible with Category III equipment.
Dimensions and Operator Environment
The Panther IV CM-360 features a shipping weight of 26,903 lbs, reaching a maximum operational weight of 34,000 lbs. It is equipped with the Steiger Safari Cab as standard, which includes air conditioning to enhance operator comfort during extended work intervals. Stopping power is provided by hydraulic disc brakes.
Conclusion
The Steiger Panther IV CM-360 is a robust, high-horsepower tractor engineered for large-scale farming requirements. Its combination of a high-torque Caterpillar engine, flexible gear selection, and heavy chassis makes it well-suited for intensive primary tillage and heavy-duty draft applications.
Production Information of Steiger, Panther IV CM-360
- Four-wheel Drive (4WD) tractor
- Built in Fargo, North Dakota, USA
| Manufacturer | Steiger |
|---|
Dimension and Tires Information of Steiger, Panther IV CM-360
| Front tread | 79 to 136.3 inches [200 to 346 cm] |
|---|---|
| Wheelbase | 129 inches [327 cm] |
| Shipping weight | 26903 lbs [12203 kg] |
| Shipping weight(optional) | 159.5 inches [405 cm] |
| Length | 253.6 inches [644 cm] |
| Rear tread | 79 to 136.3 inches [200 to 346 cm] |
| Max weight | 34000 lbs [15422 kg] |
| Width | 96 inches [243 cm] |
Width over 23.1x34 duals
Width at fenders
| Ag rear | 20.8x34 |
|---|---|
| Ag front | 23.1x34 |
| Ag front(optional) | 24.5x32 |
| Ag front(optional) | 20.8x38 |
| Ag rear | 23.1x34 |
| Ag rear(optional) | 20.8x38 |
| Ag rear(optional) | 30.5x32 |
| Ag front | 20.8x34 |
| Ag front(optional) | 30.5x32 |
| Ag front(optional) | 24.5x32 |
Engine Specifications of Steiger, Panther IV CM-360
- Caterpillar 3406
- Liquid-cooled inline
- 6-cylinder
- Turbocharged aftercooled diesel
| Rated RPM | 2100 |
|---|---|
| Torque RPM | 1200 |
| Displacement | 893 ci [14.6 L] |
| Bore/Stroke | 5.40x6.50 inches [137 x 165 mm] |
| Power | 360 hp [268.5 kW] |
| Torque | 1175 lb-ft [1593.3 Nm] |
| Operating RPM | 1700-2100 |
| Coolant capacity | 70 qts [66.2 L] |
| Oil capacity | 36 qts [34.1 L] |
| Starter volts | 12 |
Transmission Information of Steiger, Panther IV CM-360
Transmission variants 1
| Transmission | Spicer SST 1010 |
|---|---|
| Type | Constant mesh 10-speed transmission with 2-speed transfer case. |
| Gears | 20 forward and 4 reverse |
Mechanical Specs of Steiger, Panther IV CM-360
- Four-wheel drive
- Steiger Safari Cab standard with air-conditioning.
- Articulated power steering
- Hydraulic disc brakes
Power Information of Steiger, Panther IV CM-360
| Engine | 360 hp [268.5 kW] |
|---|---|
| Drawbar (claimed) | 301 hp [224.5 kW] |
Hydraulics Specifications of Steiger, Panther IV CM-360
| Type | Open center |
|---|---|
| Pump flow | 31 gpm [117.3 lpm] |
| Pressure | 2250 psi [155.1 bar] |
| Valves | 3 to 5 |
Three-Point Hitch of Steiger, Panther IV CM-360
| Rear Type(optional) | III |
|---|
Electrical System of Steiger, Panther IV CM-360
| Charging system | Alternator |
|---|---|
| Battery volts | 12 |
| Charging amps | 90 |
| Batteries | 3 |
Where it sits
With 360 HP, the Steiger Panther IV CM-360 sits between Panther III ST-350 (350 HP) and 9180 (375 HP) in Steiger's range. Its power puts it in the 98th percentile of 1980s models in our database (2052 machines).
Frequently asked questions
How much horsepower does the Steiger Panther IV CM-360 have?
The Steiger Panther IV CM-360 delivers 360 HP.
What years was the Steiger Panther IV CM-360 produced?
The Steiger Panther IV CM-360 was produced in 1983-1985.
What engine does the Steiger Panther IV CM-360 have?
The Steiger Panther IV CM-360 is powered by a Turbocharged aftercooled diesel, 6-cylinder engine.
What transmission does the Steiger Panther IV CM-360 use?
The Steiger Panther IV CM-360 uses a Spicer SST 1010 transmission.
How much does the Steiger Panther IV CM-360 weigh?
The Steiger Panther IV CM-360 weighs 26903 lbs [12203 kg].
Is the Steiger Panther IV CM-360 4WD?
The Steiger Panther IV CM-360 is available in 4WD.