Steiger Panther III ST-350
Power
350 hp
Production
1977-1981
Engine
Turbocharged diesel, 8-cylinder
Transmission
Spicer SST 1010
Weight
26700 lbs [12111 kg]
Drive
4WD
Introduction
Production Information of Steiger, Panther III ST-350
The production information of the tractor (Panther III ST-350) includes details about its manufacturing.
| Original price was $94,700 in 1981 |
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | Steiger |
|---|
Dimension and Tires Information of Steiger, Panther III ST-350
This section sums up the dimension and tires information of the tractor.
| Raba 598 rear axle |
| Front axle | Raba 598 |
|---|---|
| Wheelbase | 128 inches [325 cm] |
| Shipping weight | 26700 lbs [12111 kg] |
| Height (exhaust) | 155.8 inches [395 cm] |
| Length | 252 inches [640 cm] |
| Max weight | 34000 lbs [15422 kg] |
| Width | 96 inches (tractor body) [243 cm] |
| Ag front | 20.8-34 |
|---|---|
| Ag rear | 20.8-34 |
Engine Specifications of Steiger, Panther III ST-350
Get the specifications for the engine and if different options are available.
| Cummins VT-903 |
| Liquid-cooled |
| Turbocharged diesel |
| 8-cylinder |
| Coolant capacity | 68 qts [64.4 L] |
|---|---|
| Compression | 15.5:1 |
| Rated RPM | 2600 |
| Torque | 848 lb-ft [1149.9 Nm] |
| Idle RPM | 830-2860 |
| Displacement | 903 ci [14.8 L] |
| Power | 350 hp [261.0 kW] |
| Bore/Stroke | 5.50x4.75 inches [140 x 121 mm] |
| Oil capacity | 38 qts [36.0 L] |
| Starter volts | 12 |
| Torque RPM | 1800 |
Transmission Information of Steiger, Panther III ST-350Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Spicer SST 1010 |
|---|---|
| Gears | 10 forward and 2 reverse |
| Clutch | Hydraulic dry discs |
Transmission variants 2
| Ten-speed transmission with two-speed transfer case. |
| Transmission | Spicer SST 1010 |
|---|---|
| Gears | 20 forward and 4 reverse |
| Clutch | 394mm dry disc |
| 10-speed |
| 20-speed |
Mechanical Specs of Steiger, Panther III ST-350Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Safari Cab standard with heat and air-conditioning. |
| Hydraulic disc brakes |
| Articulated power steering |
| Final drives | Outboard planetary |
|---|
Power Information of Steiger, Panther III ST-350Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Engine | 350 hp [261.0 kW] |
|---|---|
| Drawbar (claimed) | 311 hp [231.9 kW] |
Hydraulics Specifications of Steiger, Panther III ST-350
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 30.1 gpm [113.9 lpm] |
| Valves | 4 |
| Capacity | 33 gal [124.9 L] |
| Pressure | 2250 psi [155.1 bar] |
Three-Point Hitch of Steiger, Panther III ST-350
Hitch category and rear/front lift capacity.
| Rear Type | III OptOptional |
|---|
Electrical System of Steiger, Panther III ST-350
Battery voltage, charging system and ground.
| Battery Group | 8D |
|---|---|
| Ground | Negative |
| Battery volts | 12 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery AH | 208 |
| Charging amps | 90 |
Frequently asked questions
How much horsepower does the Steiger Panther III ST-350 have?
The Steiger Panther III ST-350 delivers 350 HP.
What years was the Steiger Panther III ST-350 produced?
The Steiger Panther III ST-350 was produced in 1977-1981.
What engine does the Steiger Panther III ST-350 have?
The Steiger Panther III ST-350 is powered by a Turbocharged diesel, 8-cylinder engine.
What transmission does the Steiger Panther III ST-350 use?
The Steiger Panther III ST-350 uses a Spicer SST 1010 transmission.
How much does the Steiger Panther III ST-350 weigh?
The Steiger Panther III ST-350 weighs 26700 lbs [12111 kg].
Is the Steiger Panther III ST-350 4WD?
The Steiger Panther III ST-350 is available in 4WD.