Introduction
Cub Cadet 1806 Garden Tractor
The Cub Cadet 1806 is a garden tractor produced between 1987 and 1989 in Brownsville, Tennessee, USA. Designed for residential lawn care and property maintenance, this model belongs to the 1211 and 1810 series.
Engine and Powertrain
The tractor is powered by an air-cooled, two-cylinder engine with a displacement of 691 cc (42.18 ci). It delivers a gross power output of 18 hp (13.4 kW). The engine operates with an idle RPM range of 1200-3600. Power is transmitted through a shaft-driven gear transmission featuring 6 forward gears and 2 reverse gears, utilizing a mechanical dry disc clutch.
Mechanical and Electrical Systems
The 1806 is a two-wheel drive machine featuring manual steering and dual disc brakes for operational control. The electrical system is powered by a 12-volt battery and an alternator providing 15 charging amps. Engine starting is handled by an electric starter.
Dimensions and PTO
The machine has a wheelbase of 44 inches (111 cm) and a total length of 72 inches (182 cm). It offers a ground clearance of 6 inches (15 cm) and a steering wheel height of 43 inches (109 cm). The unit is equipped with an independent front PTO engaged by an electric clutch, allowing for the attachment of 38, 44, or 50-inch mower decks.
Conclusion
The Cub Cadet 1806 is a compact, gear-driven garden tractor designed for versatility in lawn management. Its combination of an 18 hp engine and multiple mower deck options makes it suitable for varied residential groundskeeping tasks.
Production Information of Cub Cadet, 1806
- Garden tractor
- Built in Brownsville, Tennessee, USA
| Manufacturer | Cub Cadet (a part of MTD) |
|---|
Dimension and Tires Information of Cub Cadet, 1806
| Rear tread | 27 inches [68 cm] |
|---|---|
| Wheelbase | 44 inches [111 cm] |
| Ground clearance | 6 inches [15 cm] |
| Height (steering wheel) | 43 inches [109 cm] |
| Length | 72 inches [182 cm] |
| Front tread | 29 inches [73 cm] |
| Width | 37.75 inches [95 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 23x10.50-12 |
Engine Specifications of Cub Cadet, 1806
- Air-cooled
- 2-cylinder
| Sparkplug gap | 0.25 inches [6.350 mm] |
|---|---|
| Displacement | 691 cc [42.18 ci] |
| Oil capacity | 2 qts [1.9 L] |
| Idle RPM | 1200-3600 |
| Bore/Stroke | 3.125x2.75 inches [79 x 70 mm] |
| Exhaust valve clearance | 0.012 inches (cold) [0.305 mm] |
| Intake valve clearance | 0.004 inches (cold) [0.102 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Power (gross) | 18 hp [13.4 kW] |
Transmission Information of Cub Cadet, 1806
Transmission variants 1
| Type | Shaft-driven gear |
|---|---|
| Oil capacity | 4 qts [3.8 L] |
| Gears | 6 forward and 2 reverse |
| Clutch | Mechanical dry disc |
Mechanical Specs of Cub Cadet, 1806
- Two-wheel drive
- Open operator station.
- Manual steering
- Dual disc brakes
Power Information of Cub Cadet, 1806
| Front PTO | Independent |
|---|---|
| Clutch | Electric |
Three-Point Hitch of Cub Cadet, 1806
| Rear Type(optional) | 0 |
|---|
Electrical System of Cub Cadet, 1806
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 15 |
Where it sits
With 18 HP, the Cub Cadet 1806 sits just above 1211 (12 HP) in Cub Cadet's range. Its power puts it in the 93th percentile of 1980s models in our database (977 machines).
Frequently asked questions
How much horsepower does the Cub Cadet 1806 have?
The Cub Cadet 1806 delivers 18 HP.
What years was the Cub Cadet 1806 produced?
The Cub Cadet 1806 was produced in 1987-1989.
What engine does the Cub Cadet 1806 have?
The Cub Cadet 1806 is powered by a 2-cylinder engine.
What transmission does the Cub Cadet 1806 use?
The Cub Cadet 1806 uses a Shaft-driven gear transmission.
Is the Cub Cadet 1806 4WD?
The Cub Cadet 1806 is available in 2WD.