Introduction
Cub Cadet 1812 Garden Tractor
The Cub Cadet 1812 is a garden tractor produced between 1986 and 1989 at the manufacturer's facility in Brownsville, Tennessee, USA. Designed for residential lawn care and light property maintenance, this model sits within the brand's garden tractor series.
Engine and Powertrain
The tractor is powered by an air-cooled, 2-cylinder engine with a displacement of 691 cc (42.18 ci), producing a gross power output of 18 hp (13.4 kW). It utilizes a shaft-driven hydrostatic transmission, which allows for infinite forward and reverse speed control without the need for manual gear shifting. The engine features an oil capacity of 2 quarts (1.9 L) and requires specific valve clearances of 0.004 inches for the intake and 0.012 inches for the exhaust when cold.
Mechanical and Hydraulic Systems
The 1812 is configured as a two-wheel-drive machine featuring manual steering and a dual disc brake system for stopping control. It is equipped with an independent front Power Take-Off (PTO) engaged via an electric clutch, allowing for the operation of various front-mounted implements. The tractor is compatible with 38-inch, 44-inch, and 50-inch mower decks.
Dimensions and Electrical
The machine has a wheelbase of 44 inches (111 cm) and an overall length of 72 inches (182 cm). It provides a ground clearance of 6 inches (15 cm), with a width of 37.75 inches (95 cm). The electrical system operates on 12 volts, supported by a 15-amp charging system and an electric starter.
Conclusion
The Cub Cadet 1812 is a robust garden tractor suited for homeowners requiring a reliable machine for mowing and light utility tasks. Its hydrostatic transmission and independent front PTO offer a balance of operational ease and versatility for property management.
Production Information of Cub Cadet, 1812
- Garden tractor
- Built in Brownsville, Tennessee, USA
| Manufacturer | Cub Cadet (a part of MTD) |
|---|
Dimension and Tires Information of Cub Cadet, 1812
| Rear tread | 27 inches [68 cm] |
|---|---|
| Wheelbase | 44 inches [111 cm] |
| Ground clearance | 6 inches [15 cm] |
| Height (steering wheel) | 43 inches [109 cm] |
| Length | 72 inches [182 cm] |
| Front tread | 29 inches [73 cm] |
| Width | 37.75 inches [95 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 23x10.50-12 |
Engine Specifications of Cub Cadet, 1812
- Air-cooled
- 2-cylinder
| Sparkplug gap | 0.25 inches [6.350 mm] |
|---|---|
| Displacement | 691 cc [42.18 ci] |
| Oil capacity | 2 qts [1.9 L] |
| Idle RPM | 1200-3600 |
| Bore/Stroke | 3.125x2.75 inches [79 x 70 mm] |
| Exhaust valve clearance | 0.012 inches (cold) [0.305 mm] |
| Intake valve clearance | 0.004 inches (cold) [0.102 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Power (gross) | 18 hp [13.4 kW] |
Transmission Information of Cub Cadet, 1812
Transmission variants 1
| Type | Shaft-driven hydrostatic |
|---|---|
| Gears | Infinite forward and reverse |
| Oil capacity | 7 qts [6.6 L] |
Mechanical Specs of Cub Cadet, 1812
- Two-wheel drive
- Open operator station.
- Manual steering
- Dual disc brakes
Power Information of Cub Cadet, 1812
| Front PTO | Independent |
|---|---|
| Clutch | Electric |
Three-Point Hitch of Cub Cadet, 1812
| Rear Type(optional) | 0 |
|---|
Electrical System of Cub Cadet, 1812
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 15 |
Where it sits
With 18 HP, the Cub Cadet 1812 sits just above 1712 (17 HP) in Cub Cadet's range. Its power puts it in the 93th percentile of 1980s models in our database (977 machines).
Frequently asked questions
How much horsepower does the Cub Cadet 1812 have?
The Cub Cadet 1812 delivers 18 HP.
What years was the Cub Cadet 1812 produced?
The Cub Cadet 1812 was produced in 1986-1989.
What engine does the Cub Cadet 1812 have?
The Cub Cadet 1812 is powered by a 2-cylinder engine.
What transmission does the Cub Cadet 1812 use?
The Cub Cadet 1812 uses a Shaft-driven hydrostatic transmission.
Is the Cub Cadet 1812 4WD?
The Cub Cadet 1812 is available in 2WD.