
J.I. Case lawn tractors 222
Power
12 hp
Production
1969-1988
Engine
1-cylinder
Transmission
Hy-Drive
Weight
715 lbs [324 kg]
Drive
2WD
From the same series:
Introduction
Production Information of J.I. Case lawn tractors, 222
The production information of the tractor (222) includes details about its manufacturing.
| Garden tractor |
| Built in Winneconne, Wisconsin, USA |
| Manufacturer | J.I. Case |
|---|
Dimension and Tires Information of J.I. Case lawn tractors, 222
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 7.1 inches [18 cm] |
|---|---|
| Wheelbase | 46 inches [116 cm] |
| Height (hood) | 35.5 inches [90 cm] |
| Height (steering wheel) | 40 inches [101 cm] |
| Length | 65 inches [165 cm] |
| Shipping weight | 715 lbs [324 kg] |
| Width | 37 inches [93 cm] |
| Lawn/turf front | 6.50-8 |
|---|---|
| 10.50-12 | |
| Lawn/turf rear | 8.00-16 |
| 8.50-12 |
Engine Specifications of J.I. Case lawn tractors, 222
Get the specifications for the engine and if different options are available.
| Air-cooled |
| 1-cylinder |
| Compression | 6.6:1 |
|---|---|
| Sparkplug gap | 0.035 inches [0.889 mm] |
| Oil capacity | 1.5 qts [1.4 L] |
| Displacement | 476 cc [29.07 ci] |
| Bore/Stroke | 3.375x3.25 inches [86 x 83 mm] |
| Power (gross) | 12 hp [8.9 kW] |
| Starter volts | 12 |
| Starter | Electric |
| Exhaust valve clearance | 0.020 inches*Cold [0.508 mm] |
| Intake valve clearance | 0.009 inches*Cold [0.229 mm] |
| Point gap | 0.020 inches [0.508 mm] |
Transmission Information of J.I. Case lawn tractors, 222Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| 32oF [0oC]↓ | : SAE5W20 |
|---|---|
| Transmission | Hy-Drive |
| Oil type | 32oF [0oC]↑ : SAE20W40 32oF [0oC]↓ : SAE5W20 |
| Oil capacity | 6.5 qts [6.2 L] |
| Type | Hydraulic drive |
| 32oF [0oC]↑ | : SAE20W40 |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of J.I. Case lawn tractors, 222Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Manual steering |
| Band brakes |
Power Information of J.I. Case lawn tractors, 222Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
No data available
Hydraulics Specifications of J.I. Case lawn tractors, 222
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 8 gpm [30.3 lpm] |
| Capacity | 1.5 gal [5.7 L] |
| Pressure | 2000 psi [137.9 bar] |
Three-Point Hitch of J.I. Case lawn tractors, 222
Hitch category and rear/front lift capacity.
| Type | Sleeve hitch |
|---|
Electrical System of J.I. Case lawn tractors, 222
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 24 |
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 15 |
Frequently asked questions
How much horsepower does the J.I. Case lawn tractors 222 have?
The J.I. Case lawn tractors 222 delivers 12 HP.
What years was the J.I. Case lawn tractors 222 produced?
The J.I. Case lawn tractors 222 was produced in 1969-1988.
What engine does the J.I. Case lawn tractors 222 have?
The J.I. Case lawn tractors 222 is powered by a 1-cylinder engine.
What transmission does the J.I. Case lawn tractors 222 use?
The J.I. Case lawn tractors 222 uses a Hy-Drive transmission.
How much does the J.I. Case lawn tractors 222 weigh?
The J.I. Case lawn tractors 222 weighs 715 lbs [324 kg].
Is the J.I. Case lawn tractors 222 4WD?
The J.I. Case lawn tractors 222 is available in 2WD.