J.I. Case lawn tractors 442
Power
12 hp
Production
1969-1972
Engine
Gasoline, 1-cylinder
Transmission
HY-Drive
Weight
770 lbs [349 kg]
Drive
2WD
From the same series:
Introduction
Production Information of J.I. Case lawn tractors, 442
The production information of the tractor (442) includes details about its manufacturing.
| Garden tractor |
| Built in Winneconne, Wisconsin, USA |
| Manufacturer | J.I. Case |
|---|
Dimension and Tires Information of J.I. Case lawn tractors, 442
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 11 inches [27 cm] |
|---|---|
| Wheelbase | 46 inches [116 cm] |
| Height (hood) | 38.5 inches [97 cm] |
| Height (steering wheel) | 43.5 inches [110 cm] |
| Length | 70 inches [177 cm] |
| Front tread | 33.5 inches [85 cm] |
| Shipping weight | 770 lbs [349 kg] |
| Width | 41 inches [104 cm] |
| Rear tread | 31.5 inches [80 cm] |
| Lawn/turf front | 6.50-8 |
|---|---|
| Lawn/turf rear | 8.00-16 |
Engine Specifications of J.I. Case lawn tractors, 442
Get the specifications for the engine and if different options are available.
| Kohler K301AS |
| Air-cooled horizontal-shaft |
| Gasoline |
| 1-cylinder |
| Intake valve clearance | 0.010 inches (Cold) [0.254 mm] |
|---|---|
| Displacement | 476 cc [29.07 ci] |
| Compression | 6:1 |
| Bore/Stroke | 3.375x3.25 inches [86 x 83 mm] |
| Exhaust valve clearance | 0.020 inches (Cold) [0.508 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Power (gross) | 12 hp [8.9 kW] |
Transmission Information of J.I. Case lawn tractors, 442Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| The HY-Drive uses a fixed-displacement hydraulic pump to power a two-speed transaxle. |
| Transmission | HY-Drive |
|---|---|
| Type | Hydraulic drive |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of J.I. Case lawn tractors, 442Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Manual steering |
| Mechanical contracting band brakes |
Power Information of J.I. Case lawn tractors, 442Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
No data available
Hydraulics Specifications of J.I. Case lawn tractors, 442
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 8 gpm [30.3 lpm] |
| Capacity | 1.25 gal [4.7 L] |
| Pressure | 2000 psi [137.9 bar] |
Three-Point Hitch of J.I. Case lawn tractors, 442
Hitch category and rear/front lift capacity.
| Type | Sleeve hitch OptOptional |
|---|
Electrical System of J.I. Case lawn tractors, 442
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 24 |
| Charging system | Starter-generator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the J.I. Case lawn tractors 442 have?
The J.I. Case lawn tractors 442 delivers 12 HP.
What years was the J.I. Case lawn tractors 442 produced?
The J.I. Case lawn tractors 442 was produced in 1969-1972.
What engine does the J.I. Case lawn tractors 442 have?
The J.I. Case lawn tractors 442 is powered by a Gasoline, 1-cylinder engine.
What transmission does the J.I. Case lawn tractors 442 use?
The J.I. Case lawn tractors 442 uses a HY-Drive transmission.
How much does the J.I. Case lawn tractors 442 weigh?
The J.I. Case lawn tractors 442 weighs 770 lbs [349 kg].
Is the J.I. Case lawn tractors 442 4WD?
The J.I. Case lawn tractors 442 is available in 2WD.