J.I. Case lawn tractors 444
Power
14 hp
Production
1969-1988
Engine
1-cylinder
Transmission
HY-Driv
Weight
770 lbs [349 kg]
Drive
2WD
From the same series:
Introduction
Production Information of J.I. Case lawn tractors, 444
The production information of the tractor (444) includes details about its manufacturing.
| Garden tractor |
| Built in Winneconne, Wisconsin, USA |
| Manufacturer | J.I. Case |
|---|
Dimension and Tires Information of J.I. Case lawn tractors, 444
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 11 inches [27 cm] |
|---|---|
| Wheelbase | 46 inches [116 cm] |
| Height (hood) | 38.5 inches [97 cm] |
| Height (steering wheel) | 43.5 inches [110 cm] |
| Length | 70 inches [177 cm] |
| Front tread | 33.5 inches [85 cm] |
| Shipping weight | 770 lbs [349 kg] |
| Width | 41 inches [104 cm] |
| Rear tread | 31.5 inches [80 cm] |
| Lawn/turf front | 6.50-8 |
|---|---|
| 10.50-12 | |
| Lawn/turf rear | 8.00-16 |
| 8.50-12 |
Engine Specifications of J.I. Case lawn tractors, 444
Get the specifications for the engine and if different options are available.
| Air-cooled horizontal-shaft |
| 1-cylinder |
| Compression | 7:1 |
|---|---|
| Sparkplug gap | 0.035 inches [0.889 mm] |
| Oil capacity | 1.5 qts [1.4 L] |
| Displacement | 512 cc [31.27 ci] |
| Bore/Stroke | 3.50x3.25 inches [89 x 83 mm] |
| Power (gross) | 14 hp [10.4 kW] |
| Starter volts | 12 |
| Starter | Electric |
| Exhaust valve clearance | 0.020 inches (Cold) [0.508 mm] |
| Intake valve clearance | 0.010 inches (Cold) [0.254 mm] |
| Point gap | 0.020 inches [0.508 mm] |
Transmission Information of J.I. Case lawn tractors, 444Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| The HY-Drive uses a fixed-displacement hydraulic pump to power a two-speed transaxle. |
| 32oF [0oC]↓ | : SAE5W20 |
|---|---|
| Transmission | HY-Driv |
| Oil type | 32oF [0oC]↑ : SAE20W40 32oF [0oC]↓ : SAE5W20 |
| Oil capacity | 6.5 qts [6.2 L] |
| Type | Hydraulic drive |
| 32oF [0oC]↑ | : SAE20W40 |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of J.I. Case lawn tractors, 444Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Band brakes |
| Open operator station. |
Power Information of J.I. Case lawn tractors, 444Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
No data available
Hydraulics Specifications of J.I. Case lawn tractors, 444
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 8 gpm [30.3 lpm] |
| Capacity | 1.25 gal [4.7 L] |
| Pressure | 2000 psi [137.9 bar] |
Three-Point Hitch of J.I. Case lawn tractors, 444
Hitch category and rear/front lift capacity.
| Type | Sleeve hitch OptOptional |
|---|
Electrical System of J.I. Case lawn tractors, 444
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 24 |
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 15 |
Frequently asked questions
How much horsepower does the J.I. Case lawn tractors 444 have?
The J.I. Case lawn tractors 444 delivers 14 HP.
What years was the J.I. Case lawn tractors 444 produced?
The J.I. Case lawn tractors 444 was produced in 1969-1988.
What engine does the J.I. Case lawn tractors 444 have?
The J.I. Case lawn tractors 444 is powered by a 1-cylinder engine.
What transmission does the J.I. Case lawn tractors 444 use?
The J.I. Case lawn tractors 444 uses a HY-Driv transmission.
How much does the J.I. Case lawn tractors 444 weigh?
The J.I. Case lawn tractors 444 weighs 770 lbs [349 kg].
Is the J.I. Case lawn tractors 444 4WD?
The J.I. Case lawn tractors 444 is available in 2WD.