Introduction
Production Information of Branson, 4220i
The production information of the tractor (4220i) includes details about its manufacturing.
| Distributor | Branson |
|---|---|
| Manufacturer | Kukje |
Dimension and Tires Information of Branson, 4220i
This section sums up the dimension and tires information of the tractor.
| Front tread | 50.4 inches [128 cm] |
|---|---|
| Wheelbase | 69 inches [175 cm] |
| Weight | 4,087 lbs [1853 kg] |
| Height (ROPS) | 97 inches [246 cm] |
| Length | 124 inches [314 cm] |
| Rear tread | 43.6 to 59.2 inches [110 to 150 cm] |
| Ground clearance | 12 inches [30 cm] |
| Width | 56 inches [142 cm] |
| Ag front | 8-18 |
|---|---|
| Ag rear | 12.4-28 |
Engine Specifications of Branson, 4220i
Get the specifications for the engine and if different options are available.
| A2000N2 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Rated RPM | 2600 |
|---|---|
| Displacement | 127.2 ci [2.1 L] |
| Air cleaner | Dry dual element |
| Bore/Stroke | 3.3x3.7 inches [84 x 94 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Compression | 22.2:1 |
| Pre-heating | Block heater (optional) |
| Power (gross) | 42 hp [31.3 kW] |
Transmission Information of Branson, 4220iY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Synchronized shuttle |
|---|---|
| Gears | 12 forward and reverse |
Mechanical Specs of Branson, 4220iY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| ROPS. Canopy optional. Soft cab optional. |
| Wet disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of Branson, 4220iY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/540E |
Hydraulics Specifications of Branson, 4220i
Hydraulic system type, pressure, pump flow and valves.
| Valves | 0 to 2 |
|---|---|
| Total flow | 8.4 gpm [31.8 lpm] |
Three-Point Hitch of Branson, 4220i
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at ends) | 2,580 lbs [1170 kg] |
Frequently asked questions
How much horsepower does the Branson 4220i have?
The Branson 4220i delivers 42 HP.
What years was the Branson 4220i produced?
The Branson 4220i was produced in 2005-2015.
What engine does the Branson 4220i have?
The Branson 4220i is powered by a Diesel, 4-cylinder engine.
What transmission does the Branson 4220i use?
The Branson 4220i uses a Synchronized shuttle transmission.
How much does the Branson 4220i weigh?
The Branson 4220i weighs 4,087 lbs [1853 kg].
Is the Branson 4220i 4WD?
The Branson 4220i is available in 4WD.